Hi Andreas,
On 04/23/2014 10:29 PM, Andreas Bießmann wrote:
For sama5d3xek we need to modify the SPL image for correct detection by ROM
code.
Signed-off-by: Andreas Bießmann <andreas.de...@googlemail.com>
For whole series,
Tested-by: Bo Shen <voice.s...@atmel.com>
---
arch/arm/cpu/armv7/at91/config.mk | 10 ++++++++++
spl/Makefile | 5 +++++
2 files changed, 15 insertions(+)
create mode 100644 arch/arm/cpu/armv7/at91/config.mk
diff --git a/arch/arm/cpu/armv7/at91/config.mk
b/arch/arm/cpu/armv7/at91/config.mk
new file mode 100644
index 0000000..09eab70
--- /dev/null
+++ b/arch/arm/cpu/armv7/at91/config.mk
@@ -0,0 +1,10 @@
+#
+# Copyright (C) 2014, Andreas Bießmann <andreas.de...@googlemail.com>
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+ifdef CONFIG_SPL_BUILD
+ALL-y += boot.bin
+else
+ALL-y += u-boot.img
+endif
diff --git a/spl/Makefile b/spl/Makefile
index 6fec252..031bf54 100644
--- a/spl/Makefile
+++ b/spl/Makefile
@@ -182,6 +182,11 @@ MKIMAGEFLAGS_MLO.byteswap = -T omapimage -n byteswap -a
$(CONFIG_SPL_TEXT_BASE)
MLO MLO.byteswap: $(obj)/u-boot-spl.bin
$(call if_changed,mkimage)
+MKIMAGEFLAGS_boot.bin = -T atmelimage
+
+boot.bin: $(obj)/u-boot-spl.bin
+ $(call if_changed,mkimage)
+
ALL-y += $(obj)/$(SPL_BIN).bin
ifdef CONFIG_SAMSUNG
Best Regards,
Bo Shen
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
