In the case of SPL or NOR_BOOT (no SPL involved) we need to include
certain code in the build. Use !CONFIG_SKIP_LOWLEVEL_INIT rather than
CONFIG_SPL_BUILD || CONFIG_NOR_BOOT to make the code clearer, and to
make supporting XIP QSPI boot clearer in the code.
Signed-off-by: Tom Rini <tr...@ti.com>
---
arch/arm/cpu/armv7/am33xx/board.c | 4 +---
arch/arm/cpu/armv7/am33xx/emif4.c | 2 +-
board/silica/pengwyn/Makefile | 2 +-
board/ti/am335x/Makefile | 2 +-
board/ti/am335x/board.c | 2 +-
5 files changed, 5 insertions(+), 7 deletions(-)
diff --git a/arch/arm/cpu/armv7/am33xx/board.c
b/arch/arm/cpu/armv7/am33xx/board.c
index fb44cc8..28c16f8 100644
--- a/arch/arm/cpu/armv7/am33xx/board.c
+++ b/arch/arm/cpu/armv7/am33xx/board.c
@@ -142,7 +142,7 @@ int arch_misc_init(void)
return 0;
}
-#if defined(CONFIG_SPL_BUILD) || defined(CONFIG_NOR_BOOT)
+#ifndef CONFIG_SKIP_LOWLEVEL_INIT
/*
* This function is the place to do per-board things such as ramp up the
* MPU clock frequency.
@@ -200,9 +200,7 @@ static void watchdog_disable(void)
while (readl(&wdtimer->wdtwwps) != 0x0)
;
}
-#endif
-#if defined(CONFIG_SPL_BUILD) || defined(CONFIG_NOR_BOOT)
void s_init(void)
{
/*
diff --git a/arch/arm/cpu/armv7/am33xx/emif4.c
b/arch/arm/cpu/armv7/am33xx/emif4.c
index 3e39752..2c67c32 100644
--- a/arch/arm/cpu/armv7/am33xx/emif4.c
+++ b/arch/arm/cpu/armv7/am33xx/emif4.c
@@ -35,7 +35,7 @@ void dram_init_banksize(void)
}
-#if defined(CONFIG_SPL_BUILD) || defined(CONFIG_NOR_BOOT)
+#ifndef CONFIG_SKIP_LOWLEVEL_INIT
#ifdef CONFIG_TI81XX
static struct dmm_lisa_map_regs *hw_lisa_map_regs =
(struct dmm_lisa_map_regs *)DMM_BASE;
diff --git a/board/silica/pengwyn/Makefile b/board/silica/pengwyn/Makefile
index c8b4f9a..804ac37 100644
--- a/board/silica/pengwyn/Makefile
+++ b/board/silica/pengwyn/Makefile
@@ -6,7 +6,7 @@
# SPDX-License-Identifier: GPL-2.0+
#
-ifeq ($(CONFIG_SPL_BUILD)$(CONFIG_NOR_BOOT),y)
+ifeq ($(CONFIG_SKIP_LOWLEVEL_INIT),)
obj-y := mux.o
endif
diff --git a/board/ti/am335x/Makefile b/board/ti/am335x/Makefile
index c8b4f9a..804ac37 100644
--- a/board/ti/am335x/Makefile
+++ b/board/ti/am335x/Makefile
@@ -6,7 +6,7 @@
# SPDX-License-Identifier: GPL-2.0+
#
-ifeq ($(CONFIG_SPL_BUILD)$(CONFIG_NOR_BOOT),y)
+ifeq ($(CONFIG_SKIP_LOWLEVEL_INIT),)
obj-y := mux.o
endif
diff --git a/board/ti/am335x/board.c b/board/ti/am335x/board.c
index 554398f..fe1d000 100644
--- a/board/ti/am335x/board.c
+++ b/board/ti/am335x/board.c
@@ -81,7 +81,7 @@ static int read_eeprom(struct am335x_baseboard_id *header)
return 0;
}
-#if defined(CONFIG_SPL_BUILD) || defined(CONFIG_NOR_BOOT)
+#ifndef CONFIG_SKIP_LOWLEVEL_INIT
static const struct ddr_data ddr2_data = {
.datardsratio0 = ((MT47H128M16RT25E_RD_DQS<<30) |
(MT47H128M16RT25E_RD_DQS<<20) |
--
1.7.9.5
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
