On Wed, Apr 2, 2014 at 11:01 PM, Tim Harvey <thar...@gateworks.com> wrote: > Switch to an SPL image. The SPL for Ventana does the following: > - setup i2c and read the factory programmed EEPROM to obtain DRAM config > and model for board-specific calibration data > - configure DRAM per CPU/size/layout/devices/calibration > - load u-boot.img from NAND and jump to it > > This allows for a single SPL+u-boot.img to replace the previous multiple board > configurations. > > Signed-off-by: Tim Harvey <thar...@gateworks.com> > --- <snip> > diff --git a/board/gateworks/gw_ventana/gw_ventana_spl.c > b/board/gateworks/gw_ventana/gw_ventana_spl.c > new file mode 100644 > index 0000000..492c814 > --- /dev/null > +++ b/board/gateworks/gw_ventana/gw_ventana_spl.c > @@ -0,0 +1,394 @@ > +/* > + * Author: Tim Harvey <thar...@gateworks.com> > + * > + * SPDX-License-Identifier: GPL-2.0+ > + */ > + > +#include <common.h> > +#include <i2c.h> > +#include <asm/io.h> > +#include <asm/arch/iomux.h> > +#include <asm/arch/mx6_ddr_regs.h>
this header is non-existent and the include should be removed. I left this in by accident. Tim _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
