On 02/20/2014 09:16 PM, Shengzhou Liu wrote: > T2081 QDS is a high-performance computing evaluation, development and > test platform supporting the T2081 QorIQ Power Architecture processor. > > T2081QDS board Overview > ----------------------- > - T2081 SoC integrating four 64-bit dual-threads e6500 cores up to 1.8GHz > - 2MB shared L2 and 512KB L3 CoreNet platform cache (CPC) > - CoreNet fabric supporting coherent and noncoherent transactions with > prioritization and bandwidth allocation > - 32-/64-bit DDR3/DDR3LP SDRAM memory controller with ECC and interleaving > - Ethernet interfaces: > - Two on-board 10M/100M/1G bps RGMII ports > - Two 10Gbps XFI with on-board SFP+ cage > - 1Gbps/2.5Gbps SGMII Riser card > - 10Gbps XAUI Riser card > - Accelerator: > - DPAA components consist of FMan, BMan, QMan, PME, DCE and SEC > - SerDes: > - 8 lanes up to 10.3125GHz > - Supports SGMII, HiGig, XFI, XAUI and Aurora debug, > - IFC: > - 512MB NOR Flash, 2GB NAND Flash, PromJet debug port and Qixis FPGA > - eSPI: > - Three SPI flash (16MB N25Q128A + 16MB EN25S64 + 512KB SST25WF040) > - USB: > - Two USB2.0 ports with internal PHY (one Type-A + one micro Type mini-AB) > - PCIe: > - Four PCI Express controllers (two PCIe 2.0 and two PCIe 3.0 with SR-IOV) > - eSDHC: > - Supports various SD/SDHC/SDXC/eMMC devices with adapter cards and > voltage translators > - I2C: > - Four I2C controllers. > - UART: > - Dual 4-pins UART serial ports > > Signed-off-by: Shengzhou Liu <shengzhou....@freescale.com> > --- > v3: add fixup devicetree for t2081qds. > v2: some update for serdes and network configuration. > > board/freescale/t2080qds/Makefile | 12 - > board/freescale/t2080qds/ddr.c | 119 ----- > board/freescale/t2080qds/ddr.h | 72 --- > board/freescale/t2080qds/eth_t2080qds.c | 517 ------------------- > board/freescale/t2080qds/law.c | 34 -- > board/freescale/t2080qds/pci.c | 23 - > board/freescale/t2080qds/t2080_pbi.cfg | 41 -- > board/freescale/t2080qds/t2080_rcw.cfg | 8 - > board/freescale/t2080qds/t2080qds.c | 378 -------------- > board/freescale/t2080qds/t2080qds.h | 13 - > board/freescale/t2080qds/t2080qds_qixis.h | 47 -- > board/freescale/t2080qds/tlb.c | 146 ------ > board/freescale/t208xqds/Makefile | 14 + > board/freescale/t208xqds/ddr.c | 119 +++++ > board/freescale/t208xqds/ddr.h | 72 +++ > board/freescale/t208xqds/eth_t208xqds.c | 648 ++++++++++++++++++++++++ > board/freescale/t208xqds/law.c | 34 ++ > board/freescale/t208xqds/pci.c | 23 + > board/freescale/t208xqds/t2080_rcw.cfg | 8 + > board/freescale/t208xqds/t2081_rcw.cfg | 8 + > board/freescale/t208xqds/t208x_pbi.cfg | 41 ++ > board/freescale/t208xqds/t208xqds.c | 459 +++++++++++++++++ > board/freescale/t208xqds/t208xqds.h | 13 + > board/freescale/t208xqds/t208xqds_qixis.h | 49 ++ > board/freescale/t208xqds/tlb.c | 146 ++++++ > boards.cfg | 15 +- > include/configs/T2080QDS.h | 804 ----------------------------- > include/configs/T208xQDS.h | 817 > ++++++++++++++++++++++++++++++ > 28 files changed, 2461 insertions(+), 2219 deletions(-) > delete mode 100644 board/freescale/t2080qds/Makefile > delete mode 100644 board/freescale/t2080qds/ddr.c > delete mode 100644 board/freescale/t2080qds/ddr.h > delete mode 100644 board/freescale/t2080qds/eth_t2080qds.c > delete mode 100644 board/freescale/t2080qds/law.c > delete mode 100644 board/freescale/t2080qds/pci.c > delete mode 100644 board/freescale/t2080qds/t2080_pbi.cfg > delete mode 100644 board/freescale/t2080qds/t2080_rcw.cfg > delete mode 100644 board/freescale/t2080qds/t2080qds.c > delete mode 100644 board/freescale/t2080qds/t2080qds.h > delete mode 100644 board/freescale/t2080qds/t2080qds_qixis.h > delete mode 100644 board/freescale/t2080qds/tlb.c > create mode 100644 board/freescale/t208xqds/Makefile > create mode 100644 board/freescale/t208xqds/ddr.c > create mode 100644 board/freescale/t208xqds/ddr.h > create mode 100644 board/freescale/t208xqds/eth_t208xqds.c > create mode 100644 board/freescale/t208xqds/law.c > create mode 100644 board/freescale/t208xqds/pci.c > create mode 100644 board/freescale/t208xqds/t2080_rcw.cfg > create mode 100644 board/freescale/t208xqds/t2081_rcw.cfg > create mode 100644 board/freescale/t208xqds/t208x_pbi.cfg > create mode 100644 board/freescale/t208xqds/t208xqds.c > create mode 100644 board/freescale/t208xqds/t208xqds.h > create mode 100644 board/freescale/t208xqds/t208xqds_qixis.h > create mode 100644 board/freescale/t208xqds/tlb.c > delete mode 100644 include/configs/T2080QDS.h > create mode 100644 include/configs/T208xQDS.h >
Next time, please format the patch with this command git format-patch -M -C --find-copies-harder It will generate a patch with detection of moving and copies code, so your change set will be much smaller. York _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
