Sorry folks, I missed my morning caffeine and mislabeled the patch version in the subject as v1. I will be resending the series with the proper v2 versioning asap to avoid confusion.
Regards, Darwin > -----Original Message----- > From: Darwin Rambo [mailto:dra...@broadcom.com] > Sent: Monday, February 03, 2014 1:03 PM > To: u-boot@lists.denx.de > Cc: Darwin Rambo > Subject: [PATCH v1 0/6] Introducing the Broadcom bcm281xx Architecture > > This patchset introduces the Broadcom bcm281xx family of mobile SoC > chips. Broadcom kona hardware blocks are often found in Broadcom mobile > SoC chips including the bcm281xx family, so support for some of these > kona blocks is also provided here. These patches work on u-boot master > as well as the u-boot-arm custodian tree. > > v1 changes > ---------- > Delete lowlevel_init.S and create s_init.c. File header cleanup, > cosmetic changes, dead code removal. Create include/bitfield.h. > Use get_ram_size(). Use weak timer_init(); Skip lowlevel init. > Remove memory test config. Use standard baud table and prompt. > > > Darwin Rambo (6): > arch: kona: Initial commit of kona-common architecture code > arch: bcm281xx: Initial commit of bcm281xx architecture code > gpio: kona: Add Kona gpio driver > i2c: kona: Add Kona I2C driver > mmc: kona: Add Kona mmc driver > board: bcm28155_ap: Add board files > > arch/arm/cpu/armv7/Makefile | 1 + > arch/arm/cpu/armv7/bcm281xx/Makefile | 11 + > arch/arm/cpu/armv7/bcm281xx/clk-bcm281xx.c | 523 > +++++++++++++++++ > arch/arm/cpu/armv7/bcm281xx/clk-bsc.c | 52 ++ > arch/arm/cpu/armv7/bcm281xx/clk-core.c | 513 +++++++++++++++++ > arch/arm/cpu/armv7/bcm281xx/clk-core.h | 495 ++++++++++++++++ > arch/arm/cpu/armv7/bcm281xx/clk-sdio.c | 73 +++ > arch/arm/cpu/armv7/bcm281xx/reset.c | 27 + > arch/arm/cpu/armv7/kona-common/Makefile | 9 + > arch/arm/cpu/armv7/kona-common/clk-stubs.c | 21 + > arch/arm/cpu/armv7/kona-common/hwinit-common.c | 16 + > arch/arm/cpu/armv7/kona-common/s_init.c | 12 + > arch/arm/include/asm/arch-bcm281xx/gpio.h | 15 + > arch/arm/include/asm/arch-bcm281xx/sysmap.h | 25 + > arch/arm/include/asm/kona-common/clk.h | 29 + > arch/arm/include/asm/kona-common/kona_sdhci.h | 12 + > board/broadcom/bcm28155_ap/Makefile | 7 + > board/broadcom/bcm28155_ap/bcm28155_ap.c | 87 +++ > boards.cfg | 1 + > drivers/gpio/Makefile | 1 + > drivers/gpio/kona_gpio.c | 141 +++++ > drivers/i2c/Makefile | 1 + > drivers/i2c/kona_i2c.c | 730 > ++++++++++++++++++++++++ > drivers/mmc/Makefile | 1 + > drivers/mmc/kona_sdhci.c | 125 ++++ > include/bitfield.h | 56 ++ > include/configs/bcm28155_ap.h | 140 +++++ > 27 files changed, 3124 insertions(+) > create mode 100644 arch/arm/cpu/armv7/bcm281xx/Makefile > create mode 100644 arch/arm/cpu/armv7/bcm281xx/clk-bcm281xx.c > create mode 100644 arch/arm/cpu/armv7/bcm281xx/clk-bsc.c > create mode 100644 arch/arm/cpu/armv7/bcm281xx/clk-core.c > create mode 100644 arch/arm/cpu/armv7/bcm281xx/clk-core.h > create mode 100644 arch/arm/cpu/armv7/bcm281xx/clk-sdio.c > create mode 100644 arch/arm/cpu/armv7/bcm281xx/reset.c > create mode 100644 arch/arm/cpu/armv7/kona-common/Makefile > create mode 100644 arch/arm/cpu/armv7/kona-common/clk-stubs.c > create mode 100644 arch/arm/cpu/armv7/kona-common/hwinit-common.c > create mode 100644 arch/arm/cpu/armv7/kona-common/s_init.c > create mode 100644 arch/arm/include/asm/arch-bcm281xx/gpio.h > create mode 100644 arch/arm/include/asm/arch-bcm281xx/sysmap.h > create mode 100644 arch/arm/include/asm/kona-common/clk.h > create mode 100644 arch/arm/include/asm/kona-common/kona_sdhci.h > create mode 100644 board/broadcom/bcm28155_ap/Makefile > create mode 100644 board/broadcom/bcm28155_ap/bcm28155_ap.c > create mode 100644 drivers/gpio/kona_gpio.c > create mode 100644 drivers/i2c/kona_i2c.c > create mode 100644 drivers/mmc/kona_sdhci.c > create mode 100644 include/bitfield.h > create mode 100644 include/configs/bcm28155_ap.h > > -- > 1.7.9.5 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
