This patch simply converts the board to the hwconfig infrastructure. Signed-off-by: Anton Vorontsov <avoront...@ru.mvista.com> --- board/freescale/mpc8315erdb/mpc8315erdb.c | 14 +++++--------- include/configs/MPC8315ERDB.h | 1 + 2 files changed, 6 insertions(+), 9 deletions(-)
diff --git a/board/freescale/mpc8315erdb/mpc8315erdb.c b/board/freescale/mpc8315erdb/mpc8315erdb.c index 9d6896d..d9cff86 100644 --- a/board/freescale/mpc8315erdb/mpc8315erdb.c +++ b/board/freescale/mpc8315erdb/mpc8315erdb.c @@ -24,6 +24,7 @@ */ #include <common.h> +#include <hwconfig.h> #include <i2c.h> #include <libfdt.h> #include <fdt_support.h> @@ -177,20 +178,15 @@ void pci_init_board(void) #if defined(CONFIG_OF_BOARD_SETUP) void fdt_tsec1_fixup(void *fdt, bd_t *bd) { - char *mpc8315erdb = getenv("mpc8315erdb"); const char disabled[] = "disabled"; const char *path; int ret; - if (!mpc8315erdb) + if (hwconfig_arg_cmp("board_type", "tsec1")) { return; - - if (!strcmp(mpc8315erdb, "tsec1")) { - return; - } else if (strcmp(mpc8315erdb, "ulpi")) { - printf("WARNING: wrong `mpc8315erdb' environment " - "variable specified: `%s'. Should be `ulpi' " - "or `tsec1'.\n", mpc8315erdb); + } else if (!hwconfig_arg_cmp("board_type", "ulpi")) { + printf("NOTICE: No or unknown board_type hwconfig specified.\n" + " Assuming board with TSEC1.\n"); return; } diff --git a/include/configs/MPC8315ERDB.h b/include/configs/MPC8315ERDB.h index e3dcf96..6ed3a9f 100644 --- a/include/configs/MPC8315ERDB.h +++ b/include/configs/MPC8315ERDB.h @@ -72,6 +72,7 @@ #define CONFIG_SYS_SICRL 0x00000000 /* 3.3V, no delay */ #define CONFIG_BOARD_EARLY_INIT_F /* call board_pre_init */ +#define CONFIG_HWCONFIG /* * IMMR new address -- 1.6.2.2 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot