The only thing we know in our PV machine through device tree is the clock
speed of the CPUs. Take that as CPU speed, system speed and ddr speed so that
we have some meaningful values there at all.
The CPU speed is important because our timing loops get determined based on it.
Signed-off-by: Alexander Graf <ag...@suse.de>
---
arch/powerpc/cpu/mpc85xx/Makefile | 2 ++
board/freescale/qemu-ppce500/qemu-ppce500.c | 43 +++++++++++++++++++++++++++
2 files changed, 45 insertions(+)
diff --git a/arch/powerpc/cpu/mpc85xx/Makefile
b/arch/powerpc/cpu/mpc85xx/Makefile
index ef7637a..4094785 100644
--- a/arch/powerpc/cpu/mpc85xx/Makefile
+++ b/arch/powerpc/cpu/mpc85xx/Makefile
@@ -102,7 +102,9 @@ obj-y += cpu.o
obj-y += cpu_init.o
obj-y += cpu_init_early.o
obj-y += interrupts.o
+ifneq ($(CONFIG_QEMU_E500),y)
obj-y += speed.o
+endif
obj-y += tlb.o
obj-y += traps.o
diff --git a/board/freescale/qemu-ppce500/qemu-ppce500.c
b/board/freescale/qemu-ppce500/qemu-ppce500.c
index 5d4dd64..9e9d688 100644
--- a/board/freescale/qemu-ppce500/qemu-ppce500.c
+++ b/board/freescale/qemu-ppce500/qemu-ppce500.c
@@ -407,3 +407,46 @@ void init_laws(void)
{
/* We don't emulate LAWs yet */
}
+
+static uint32_t get_cpu_freq(void)
+{
+ const void *fdt = get_fdt();
+ int cpus_node = fdt_path_offset(fdt, "/cpus");
+ int cpu_node = fdt_first_subnode(fdt, cpus_node);
+ return myfdt_one_cell(fdt, cpu_node, "clock-frequency", 0);
+}
+
+void get_sys_info(sys_info_t *sys_info)
+{
+ int freq = get_cpu_freq();
+
+ memset(sys_info, 0, sizeof(sys_info_t));
+ sys_info->freq_systembus = freq;
+ sys_info->freq_ddrbus = freq;
+ sys_info->freq_processor[0] = freq;
+}
+
+int get_clocks (void)
+{
+ sys_info_t sys_info;
+
+ get_sys_info(&sys_info);
+
+ gd->cpu_clk = sys_info.freq_processor[0];
+ gd->bus_clk = sys_info.freq_systembus;
+ gd->mem_clk = sys_info.freq_ddrbus;
+ gd->arch.lbc_clk = sys_info.freq_ddrbus;
+
+ return 0;
+}
+
+/********************************************
+ * get_bus_freq
+ * return system bus freq in Hz
+ *********************************************/
+ulong get_bus_freq (ulong dummy)
+{
+ sys_info_t sys_info;
+ get_sys_info(&sys_info);
+ return sys_info.freq_systembus;
+}
--
1.7.10.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
