On the previous HW revision (now unsupported), there was a need for external DMA signals and thus the I2C3/4 signals were used DMA1_DONE/ACK/REQ.
These signals now are configured as GPIO[16:19]. Signed-off-by: Valentin Longchamp <valentin.longch...@keymile.com> --- Changes in v2: None board/keymile/kmp204x/rcw_kmp204x.cfg | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/board/keymile/kmp204x/rcw_kmp204x.cfg b/board/keymile/kmp204x/rcw_kmp204x.cfg index f2b7fe3..2d4c48c 100644 --- a/board/keymile/kmp204x/rcw_kmp204x.cfg +++ b/board/keymile/kmp204x/rcw_kmp204x.cfg @@ -7,5 +7,5 @@ aa55aa55 010e0100 #64 bytes RCW data 14600000 00000000 28200000 00000000 148E70CF CFC02000 58000000 41000000 -00000000 00000000 00000000 F4428002 +00000000 00000000 00000000 F0428002 00000000 00000000 00000000 00000000 -- 1.8.0.1 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
