From: Rainer Boschung <rainer.bosch...@keymile.com>
- make use of the QRIO1 32bit register at 0x20 as bootcounter register
- check for BOOTCOUNT_MAGIC pattern when before bootcounter value is read
Signed-off-by: Rainer Boschung <rainer.bosch...@keymile.com>
Signed-off-by: Valentin Longchamp <valentin.longch...@keymile.com>
---
Changes in v2:
- change bootcounter implementation to use generic driver
board/keymile/kmp204x/kmp204x.c | 20 --------------------
include/configs/km/kmp204x-common.h | 6 ++++--
2 files changed, 4 insertions(+), 22 deletions(-)
diff --git a/board/keymile/kmp204x/kmp204x.c b/board/keymile/kmp204x/kmp204x.c
index f02642a..20a3264 100644
--- a/board/keymile/kmp204x/kmp204x.c
+++ b/board/keymile/kmp204x/kmp204x.c
@@ -133,26 +133,6 @@ void qrio_prstcfg(u8 bit, u8 mode)
out_be32(qrio_base + PRSTCFG_OFF, prstcfg);
}
-
-#define BOOTCOUNT_OFF 0x12
-
-void bootcount_store(ulong counter)
-{
- u8 val;
- void __iomem *qrio_base = (void *)CONFIG_SYS_QRIO_BASE;
-
- val = (counter <= 255) ? (u8)counter : 255;
- out_8(qrio_base + BOOTCOUNT_OFF, val);
-}
-
-ulong bootcount_load(void)
-{
- u8 val;
- void __iomem *qrio_base = (void *)CONFIG_SYS_QRIO_BASE;
- val = in_8(qrio_base + BOOTCOUNT_OFF);
- return val;
-}
-
#define NUM_SRDS_BANKS 2
#define PHY_RST 15
diff --git a/include/configs/km/kmp204x-common.h
b/include/configs/km/kmp204x-common.h
index 50330cc..e33ac90 100644
--- a/include/configs/km/kmp204x-common.h
+++ b/include/configs/km/kmp204x-common.h
@@ -149,8 +149,6 @@ unsigned long get_board_sys_clk(unsigned long dummy);
#define CONFIG_KM_KERNEL_ADDR 0x1000000 /* max kernel size 15.5Mbytes */
#define CONFIG_KM_FDT_ADDR 0x1F80000 /* max dtb size 0.5Mbytes */
-#define CONFIG_BOOTCOUNT_LIMIT
-
/*
* Local Bus Definitions
*/
@@ -207,6 +205,10 @@ unsigned long get_board_sys_clk(unsigned long dummy);
#define CONFIG_SYS_BR1_PRELIM CONFIG_SYS_QRIO_BR_PRELIM /* QRIO Base Address
*/
#define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_QRIO_OR_PRELIM /* QRIO Options */
+/* bootcounter in QRIO */
+#define CONFIG_BOOTCOUNT_LIMIT
+#define CONFIG_SYS_BOOTCOUNT_ADDR (CONFIG_SYS_QRIO_BASE + 0x20)
+
#define CONFIG_BOARD_EARLY_INIT_F
#define CONFIG_BOARD_EARLY_INIT_R /* call board_early_init_r function */
#define CONFIG_MISC_INIT_R
--
1.8.0.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
