On Fri, Jan 24, 2014 at 11:44 AM, JYOTI DUBEY <jyoti0...@gmail.com> wrote: > while compiling I got an error System not configured - see README. SO how > can I configure it for NItrogen6x board?
Please elaborate the steps what you did? > > > On Thu, Jan 23, 2014 at 8:38 PM, Jagan Teki <jagannadh.t...@gmail.com> > wrote: >> >> Have some boot flow png's long back with previous version (not the >> current) [1] >> I thought it could be a starter - not equivalently same. >> If possible better take this as a reference and start tagging around the >> source. >> >> [1] http://jagannadhteki.blog.com/2014/01/23/u-boot-functional-flowarm/ >> >> thanks! >> >> On Thu, Jan 23, 2014 at 6:10 PM, Mj Embd <mj.e...@gmail.com> wrote: >> > a) step 1 - compile and build the bin / etf >> > b) step 2 - create an asm - objdump -DS >> > c) find the lds file >> > d) locate uboot.map >> > >> > start from __start. (keep an arm manual handy) & begin. >> > >> > :) >> > >> > On 1/23/14, JYOTI DUBEY <jyoti0...@gmail.com> wrote: >> >> Can anyone tell how to understand the flow of u-boot source code? I am >> >> working on ARM processor and the board used is Nitrogen6X. >> >> -- >> Jagan. > > -- Jagan. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
