while compiling I got an error System not configured - see README. SO how can I configure it for NItrogen6x board?
On Thu, Jan 23, 2014 at 8:38 PM, Jagan Teki <jagannadh.t...@gmail.com>wrote: > Have some boot flow png's long back with previous version (not the > current) [1] > I thought it could be a starter - not equivalently same. > If possible better take this as a reference and start tagging around the > source. > > [1] http://jagannadhteki.blog.com/2014/01/23/u-boot-functional-flowarm/ > > thanks! > > On Thu, Jan 23, 2014 at 6:10 PM, Mj Embd <mj.e...@gmail.com> wrote: > > a) step 1 - compile and build the bin / etf > > b) step 2 - create an asm - objdump -DS > > c) find the lds file > > d) locate uboot.map > > > > start from __start. (keep an arm manual handy) & begin. > > > > :) > > > > On 1/23/14, JYOTI DUBEY <jyoti0...@gmail.com> wrote: > >> Can anyone tell how to understand the flow of u-boot source code? I am > >> working on ARM processor and the board used is Nitrogen6X. > > -- > Jagan. >
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
