On Fri, 2014-01-10 at 10:10 +0800, Po Liu wrote: > Using the TPL method for nand boot by sram was already > supported. Here add some code for mpc85xx ifc nand boot. > > - For ifc, elbc, esdhc, espi, all need the SPL without > section .resetvec. > - Use a clear function name for nand spl boot. > - Add CONFIG_SPL_DRIVERS_MISC_SUPPORT to compile the fsl_ifc.c > in spl/Makefile; > > Signed-off-by: Po Liu <po....@freescale.com> > --- > changes for v2: > - seperate public code and c29xpcie board code > - add ifc support > changes for v3: > - remove the redundant plus > - ifc support use CONFIG_SPL_DRIVERS_MISC_SUPPORT > changes for v4: > - modify the nand_load function > - add comments in README.SPL > changes for v5: > -none > changes for v6: > - modify the readme file for the include lib file > > arch/powerpc/cpu/mpc85xx/u-boot-spl.lds | 15 ++++++++------- > doc/README.SPL | 1 + > drivers/mtd/nand/fsl_ifc_spl.c | 31 ++++++++++++++++++++++++------- > spl/Makefile | 1 + > 4 files changed, 34 insertions(+), 14 deletions(-)
Acked-by: Scott Wood <scottw...@freescale.com> -Scott _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot