This new function is used to set all display-timings properties based on fb_videomode.
display-timings { timing0 { clock-frequency = <25000000>; hactive = <640>; vactive = <480>; hback-porch = <48>; hfront-porch = <16>; vback-porch = <31>; vfront-porch = <12>; hsync-len = <96>; vsync-len = <2>; }; }; Signed-off-by: Christian Gmeiner <christian.gmei...@gmail.com> --- common/fdt_support.c | 23 +++++++++++++++++++++++ include/fdt_support.h | 3 +++ 2 files changed, 26 insertions(+) diff --git a/common/fdt_support.c b/common/fdt_support.c index 4e32b02..cf81a4b 100644 --- a/common/fdt_support.c +++ b/common/fdt_support.c @@ -11,6 +11,7 @@ #include <stdio_dev.h> #include <linux/ctype.h> #include <linux/types.h> +#include <linux/fb.h> #include <asm/global_data.h> #include <libfdt.h> #include <fdt_support.h> @@ -1342,6 +1343,28 @@ err_size: #endif /* + * fdt_add_display_timings: add display-timings properties + * + * @fdt: ptr to device tree + * @noff: node to update + * @mode: ptr to b_videomode + */ +void fdt_add_display_timings(void *fdt, int noff, struct fb_videomode *mode) +{ + if (noff != -FDT_ERR_NOTFOUND) { + fdt_setprop_u32(fdt, noff, "clock-frequency", mode->pixclock); + fdt_setprop_u32(fdt, noff, "hactive", mode->xres); + fdt_setprop_u32(fdt, noff, "vactive", mode->yres); + fdt_setprop_u32(fdt, noff, "hback-porch", mode->left_margin); + fdt_setprop_u32(fdt, noff, "hfront-porch", mode->right_margin); + fdt_setprop_u32(fdt, noff, "vback-porch", mode->upper_margin); + fdt_setprop_u32(fdt, noff, "vfront-porch", mode->lower_margin); + fdt_setprop_u32(fdt, noff, "hsync-len", mode->hsync_len); + fdt_setprop_u32(fdt, noff, "vsync-len", mode->vsync_len); + } +} + +/* * Verify the physical address of device tree node for a given alias * * This function locates the device tree node of a given alias, and then diff --git a/include/fdt_support.h b/include/fdt_support.h index 9871e2f..1c54880 100644 --- a/include/fdt_support.h +++ b/include/fdt_support.h @@ -82,6 +82,9 @@ int fdt_set_phandle(void *fdt, int nodeoffset, uint32_t phandle); unsigned int fdt_create_phandle(void *fdt, int nodeoffset); int fdt_add_edid(void *blob, const char *compat, unsigned char *buf); +struct fb_videomode; +void fdt_add_display_timings(void *blob, int noff, struct fb_videomode *mode); + int fdt_verify_alias_address(void *fdt, int anode, const char *alias, u64 addr); u64 fdt_get_base_address(void *fdt, int node); -- 1.7.10.4 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot