Hello Minkyu,
On 01/02/2014 07:35 AM, Minkyu Kang wrote:
Hi,
On 19/12/13 03:31, Przemyslaw Marczak wrote:
Old s5p gpio coding method was not clean and was not working properly
for all parts and banks. New method is clean and easy to extend.
Gpio coding mask:
0x000000ff - pin number
0x00ffff00 - bank offset
0xff000000 - part number
Signed-off-by: Przemyslaw Marczak <p.marc...@samsung.com>
---
arch/arm/include/asm/arch-exynos/gpio.h | 169 +++++++++++-------------------
arch/arm/include/asm/arch-s5pc1xx/gpio.h | 47 +++++++--
drivers/gpio/s5p_gpio.c | 15 +--
include/configs/s5p_goni.h | 4 +-
include/configs/s5pc210_universal.h | 12 +--
include/configs/trats.h | 8 +-
include/configs/trats2.h | 12 +--
7 files changed, 125 insertions(+), 142 deletions(-)
patch failed.
$ patch --dry-run -p1 <
U-Boot-v2-01-13-s5p-gpio-change-gpio-coding-method-for-s5p-gpio..patch
patching file arch/arm/include/asm/arch-exynos/gpio.h
Hunk #1 FAILED at 196.
1 out of 1 hunk FAILED -- saving rejects to file
arch/arm/include/asm/arch-exynos/gpio.h.rej
patching file arch/arm/include/asm/arch-s5pc1xx/gpio.h
patching file drivers/gpio/s5p_gpio.c
patching file include/configs/s5p_goni.h
patching file include/configs/s5pc210_universal.h
patching file include/configs/trats.h
Hunk #1 FAILED at 283.
1 out of 1 hunk FAILED -- saving rejects to file include/configs/trats.h.rej
patching file include/configs/trats2.h
Hunk #1 FAILED at 293.
1 out of 1 hunk FAILED -- saving rejects to file include/configs/trats2.h.rej
please check it.
Thanks,
Minkyu Kang.
Thank you for reply. Probably there were some changes in tree since I
had sent this patch set. I will check this.
Regards
--
Przemyslaw Marczak
Samsung R&D Institute Poland
Samsung Electronics
p.marc...@samsung.com
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
