From: Kuo-Jung Su <dant...@faraday-tech.com>

1. It's known that EP0 fifo empty indication is not reliable, an extra delay
   is necessary to avoid data corruption while handling packets with size
   greater than 64 bytes.

2. Since hardware revision 1.11.0, some fields of interrupt status registers
   are now write-1-clear.

Changes for v2:
        - usb: gadget: fotg210: add w1c interrupt status support:
          By writting 1 then 0 to get rid of the use of
          CONFIG_USB_GADGET_FOTG210_ISRW1C.
          Thanks for Marek's comments.
        - usb: gadget: fotg210: EP0 fifo empty indication is non-reliable
          udelay_masked() -> udelay(), and patch comment updates.

Kuo-Jung Su (2):
  usb: gadget: fotg210: add w1c interrupt status support
  usb: gadget: fotg210: EP0 fifo empty indication is non-reliable

 drivers/usb/gadget/fotg210.c |   15 +++++++++++++++
 1 file changed, 15 insertions(+)

--
1.7.9.5

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to