Hi Tom and Albert, Can you look into this series.
On Thu, Dec 19, 2013 at 11:38 PM, Jagannadha Sutradharudu Teki <jagannadha.sutradharudu-t...@xilinx.com> wrote: > These changes are from u-boot-xlnx.git repo from git.xilinx.com > This repo is well tested on xilinx zynq platform, hence pushing > the same on upstream. > > Excluded qspi and nand changes from previous series. > > -- > Thanks, > Jagan. > > Jagannadha Sutradharudu Teki (29): > zynq: Enable CONFIG_FIT_VERBOSE > zynq: Enable Boot FreeBSD/vxWorks > zynq: Cleanup on miscellaneous configs > zynq: Cleanup on memory configs > zynq: Minor config cleanup > zynq: Enable cache options > zynq: Add UART0, UART1 configs support > zynq: Add GEM0, GEM1 configs support > zynq-common: Rename zynq with zynq-common > doc: zynq: Add information on zynq u-boot > zynq: Add zynq zc70x board support > zynq: Add zynq zed board support > zynq: Move CONFIG_SYS_SDRAM_SIZE to pre-board configs > zynq-common: Define exact TEXT_BASE > zynq: zc70x: Add Catalyst 24WC08 EEPROM config support > zynq: Add zynq microzed board support > zynq: Add zynq_zc770 xm010 board support > zynq: Add zynq_zc770 xm013 board support > zynq: Add zynq_zc770 xm012 board support > zynq: Add support to find bootmode > zynq-common: Define default environment > zynq-common: Change Env. Sector size to 128Kb > zynq-common: Define flash env. partition > zynq-common: Define CONFIG_ENV_OVERWRITE > dts: zynq: Add basic fdt support > gpio: zynq: Add dummy gpio routines > zynq-common: Enable verified boot(RSA) > dts: zynq: Add more zynq dts files > doc: Update the zynq u-boot status > > arch/arm/cpu/armv7/zynq/slcr.c | 6 + > arch/arm/dts/zynq-7000.dtsi | 13 ++ > arch/arm/include/asm/arch-zynq/gpio.h | 25 +++ > arch/arm/include/asm/arch-zynq/sys_proto.h | 1 + > board/xilinx/dts/zynq-microzed.dts | 14 ++ > board/xilinx/dts/zynq-zc702.dts | 14 ++ > board/xilinx/dts/zynq-zc706.dts | 14 ++ > board/xilinx/dts/zynq-zc770-xm010.dts | 14 ++ > board/xilinx/dts/zynq-zc770-xm012.dts | 14 ++ > board/xilinx/dts/zynq-zc770-xm013.dts | 14 ++ > board/xilinx/dts/zynq-zed.dts | 14 ++ > board/xilinx/zynq/board.c | 25 +++ > boards.cfg | 8 +- > doc/README.zynq | 91 +++++++++++ > include/configs/zynq-common.h | 241 > +++++++++++++++++++++++++++++ > include/configs/zynq.h | 139 ----------------- > include/configs/zynq_microzed.h | 25 +++ > include/configs/zynq_zc70x.h | 28 ++++ > include/configs/zynq_zc770.h | 39 +++++ > include/configs/zynq_zed.h | 26 ++++ > 20 files changed, 624 insertions(+), 141 deletions(-) > create mode 100644 arch/arm/dts/zynq-7000.dtsi > create mode 100644 arch/arm/include/asm/arch-zynq/gpio.h > create mode 100644 board/xilinx/dts/zynq-microzed.dts > create mode 100644 board/xilinx/dts/zynq-zc702.dts > create mode 100644 board/xilinx/dts/zynq-zc706.dts > create mode 100644 board/xilinx/dts/zynq-zc770-xm010.dts > create mode 100644 board/xilinx/dts/zynq-zc770-xm012.dts > create mode 100644 board/xilinx/dts/zynq-zc770-xm013.dts > create mode 100644 board/xilinx/dts/zynq-zed.dts > create mode 100644 doc/README.zynq > create mode 100644 include/configs/zynq-common.h > delete mode 100644 include/configs/zynq.h > create mode 100644 include/configs/zynq_microzed.h > create mode 100644 include/configs/zynq_zc70x.h > create mode 100644 include/configs/zynq_zc770.h > create mode 100644 include/configs/zynq_zed.h > -- Thanks, Jagan. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
