Dear Heiko Schocher, Heiko Schocher <h...@denx.de> writes: >enable support for the siemens AT91SAM9G20 based board corvus. > >Signed-off-by: Boris Schmidt <boris.schm...@siemens.com> >Reviewed-by: Heiko Schocher <h...@denx.de> >Cc: Andreas Bießmann <andreas.de...@googlemail.com> >Cc: Bo Shen <voice.s...@atmel.com> > >--- >- changes for v2: > - add comments from Bo Shen > - use gpio api > - remove unneccessary comment > - use at91_wait_for_reset() > - remove unneccessary code in board file > - Coding Style cleanup (tabs and unneccessary 1 after config define > removed, use ".xxx = x" notation for initializing structs) > - remove reset_phy() > - remove CONFIG_SYS_MEMTEST_x defines, as mtest command > is not used on this board. > - changes load address > - delete lcd support > - add comments from Andreas Bießmann: > - rearrange some init calls > - remove some unneeded ifdef >- changes for v3: > - add comments from Andreas Bießmann: > - removed at91sam9m10g45ek_usb_hw_init() call > - removed empty reset_phy > - removed unneccessary tab > - use at91_phy_reset() > - rebased against current commit > 2cee0408e5c6f5dbdfa89fb40168ba2ead3f61a6 > - add CONFIG_AT91_WANTS_COMMON_PHY >--- > board/siemens/corvus/Makefile | 18 ++++ > board/siemens/corvus/board.c | 195 ++++++++++++++++++++++++++++++++++++++++++ > boards.cfg | 1 + > include/configs/corvus.h | 165 +++++++++++++++++++++++++++++++++++ > 4 files changed, 379 insertions(+) > create mode 100644 board/siemens/corvus/Makefile > create mode 100644 board/siemens/corvus/board.c > create mode 100644 include/configs/corvus.h
applied to u-boot-atmel/master, thanks! Best regards, Andreas Bießmann _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
