add support for the AT91SAM9G20 boards from siemens. The patches are checkpatch clean, and a "./MAKEALL -s at91" compiles clean. Resending this patchset now without switching to the 'ATMEL_LEGACY' PIO API (Are there some patches I missed?)
I hope I find time for sending the patches for booting this boards with SPL code soon ... The 2 needed patches from previous patchseries: arm926ejs, at91: add common phy_reset function http://git.denx.de/?p=u-boot/u-boot-atmel.git;a=commit;h=4535a24c0c06e367bc40c43b4807bdb335513a1a at91: add defines for reset type http://git.denx.de/?p=u-boot/u-boot-atmel.git;a=commit;h=c12f941bece9ed79efccfe9e4a9fd977da6975f9 found there way to mainline :-) Heiko Schocher (2): arm, at91: add Siemens board taurus and axm arm, at91: add siemens corvus board board/siemens/corvus/Makefile | 18 ++++ board/siemens/corvus/board.c | 195 ++++++++++++++++++++++++++++++++++++++++++ board/siemens/taurus/Makefile | 18 ++++ board/siemens/taurus/taurus.c | 160 ++++++++++++++++++++++++++++++++++ boards.cfg | 3 + include/configs/corvus.h | 165 +++++++++++++++++++++++++++++++++++ include/configs/taurus.h | 160 ++++++++++++++++++++++++++++++++++ 7 files changed, 719 insertions(+) create mode 100644 board/siemens/corvus/Makefile create mode 100644 board/siemens/corvus/board.c create mode 100644 board/siemens/taurus/Makefile create mode 100644 board/siemens/taurus/taurus.c create mode 100644 include/configs/corvus.h create mode 100644 include/configs/taurus.h Cc: Bo Shen <voice.s...@atmel.com> Cc: Andreas Bießmann <andreas.de...@googlemail.com> -- 1.8.3.1 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
