Dear Dennis Gilmore, In message <1386296295-28658-3-git-send-email-den...@ausil.us> you wrote: > > - "fdt_addr=0x11000000\0" \ > + "fdt_addr=0x11100000\0" \ > + "fdt_addr_r=0x11200000\0" \
Why would you need fdt_addr and fdt_addr_r ? This makes no sense. Two different values would only be needed if there was NOR flash available where we could read the FDT from without loading it to RAM first. AFAIK ther ewill never be variants of the Wandboard with NOR flash, so you will always have to load the FDT to RAM first - thus the destinction makes no sense. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de "There are three principal ways to lose money: wine, women, and en- gineers. While the first two are more pleasant, the third is by far the more certain." -- Baron Rothschild, ca. 1800 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
