On Tue, Nov 19, 2013 at 11:22:18AM +0100, Lars Poeschel wrote: > From: Lars Poeschel <poesc...@lemonage.de> > > Phytec sells revision or version 3 of pcm051. It is labeled 1358.3 on > the board. The difference for u-boot is that is has other DDR3 RAM on it: > 1 x MT41K256M16HA125E instead of 2 x MT41J256M8HX15E on revisions 1 and > 2. Both configurations are 512 MiB. > Configure your u-boot build with pcm051_rev3 for the new RAM and > pcm051_rev1 for the old RAM configuration. Board revision 2 has to use > pcm051_rev1 also. > > Signed-off-by: Lars Poeschel <poesc...@lemonage.de>
Applied to u-boot-ti/master, after adapting to my change about not touching some EMIF4D registers, :thanks! -- Tom
signature.asc
Description: Digital signature
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
