Allow the switch to a second stage secure monitor just before
switching to non-secure.
This allows a resident piece of firmware to be active once the
kernel has been entered (the u-boot monitor is dead anyway,
its pages being reused).
Signed-off-by: Marc Zyngier <marc.zyng...@arm.com>
---
arch/arm/cpu/armv7/nonsec_virt.S | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/arch/arm/cpu/armv7/nonsec_virt.S b/arch/arm/cpu/armv7/nonsec_virt.S
index c5a8347..f07e3f7 100644
--- a/arch/arm/cpu/armv7/nonsec_virt.S
+++ b/arch/arm/cpu/armv7/nonsec_virt.S
@@ -35,6 +35,12 @@ _monitor_vectors:
* We use only r0 and r1 here, due to constraints in the caller.
*/
_secure_monitor:
+#ifdef CONFIG_ARMV7_PSCI_BASE
+ ldr r1, =CONFIG_ARMV7_PSCI_BASE @ Switch to the next monitor
+ mcr p15, 0, r1, c12, c0, 1
+ isb
+#endif
+
mrc p15, 0, r1, c1, c1, 0 @ read SCR
bic r1, r1, #0x4e @ clear IRQ, FIQ, EA, nET bits
orr r1, r1, #0x31 @ enable NS, AW, FW bits
@@ -50,7 +56,7 @@ _secure_monitor:
isb
#ifdef CONFIG_ARMV7_VIRT
- mrceq p15, 0, r0, c12, c0, 1 @ get MVBAR value
+ adreq r0, _monitor_vectors
mcreq p15, 4, r0, c12, c0, 0 @ write HVBAR
#endif
bne 1f
--
1.8.2.3
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
