Dear Albert ARIBAUD, > PXA start.S has a PXA (variant) specific check in > start.S. Move it to cpuinfo.c. > > Signed-off-by: Albert ARIBAUD <albert.u.b...@aribaud.net>
Either way WFM Acked-by: Marek Vasut <ma...@denx.de> > --- > arch/arm/cpu/pxa/cpuinfo.c | 6 ++++++ > arch/arm/cpu/pxa/start.S | 6 ------ > 2 files changed, 6 insertions(+), 6 deletions(-) > > diff --git a/arch/arm/cpu/pxa/cpuinfo.c b/arch/arm/cpu/pxa/cpuinfo.c > index 9d16079..17d8be5 100644 > --- a/arch/arm/cpu/pxa/cpuinfo.c > +++ b/arch/arm/cpu/pxa/cpuinfo.c > @@ -11,6 +11,12 @@ > #include <errno.h> > #include <linux/compiler.h> > > +#ifdef CONFIG_CPU_PXA25X > +#if ((CONFIG_SYS_INIT_SP_ADDR) != 0xfffff800) > +#error "Init SP address must be set to 0xfffff800 for PXA250" > +#endif > +#endif > + > #define CPU_MASK_PXA_PRODID 0x000003f0 > #define CPU_MASK_PXA_REVID 0x0000000f > > diff --git a/arch/arm/cpu/pxa/start.S b/arch/arm/cpu/pxa/start.S > index ae0d13c..eb3243a 100644 > --- a/arch/arm/cpu/pxa/start.S > +++ b/arch/arm/cpu/pxa/start.S > @@ -23,12 +23,6 @@ > #include <config.h> > #include <version.h> > > -#ifdef CONFIG_CPU_PXA25X > -#if ((CONFIG_SYS_INIT_SP_ADDR) != 0xfffff800) > -#error "Init SP address must be set to 0xfffff800 for PXA250" > -#endif > -#endif > - > .globl _start > _start: b reset > #ifdef CONFIG_SPL_BUILD Best regards, Marek Vasut _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
