Hi, Remy Bohmer wrote: > Hello Michael, > > Have you any idea about this issue? > > Kind Regards, > > Remy > > 2009/4/17 Mahajan Vivek-B08308 <vivek.maha...@freescale.com>: > >> Hello there, >> >> I built u-boot for mpc8315erdb from the current master @ >> http://git.denx.de/u-boot.git/ after enabling USB via adding the following >> #defines in include/configs/MPC8315ERDB.h:- >> >> #define CONFIG_CMD_USB >> #define CONFIG_USB_EHCI >> #define CONFIG_USB_EHCI_FSL >> >> But I ran into the following "machine check" after running usb start from >> the u-boot prompt. No USB device is plugged in. Please let me know if the >> above mentioned USB config options are sufficient to get the basic USB up >> and running. >> >> Any help in this matter is highly appreciated. >> >> I would like to support you, I don't have the board and testing was done on ixp465. I add Tor Krill that is the original author of the fsl support
Regards Michael >> Thanks, >> Vivek >> >> /************************************************************************************************************************** >> U-Boot 2009.03-00333-g7ee38c0-dirty (Apr 17 2009 - 10:33:36) MPC83XX >> >> Reset Status: Software Hard, External/Internal Soft, External/Internal Hard >> >> CPU: e300c3, MPC8315E, Rev: 1.1 at 400 MHz, CSB: 133.333 MHz >> Board: Freescale MPC8315ERDB Rev 0.0 >> I2C: ready >> DRAM: 128 MB >> FLASH: 8 MB >> NAND: 32 MiB >> *** Warning - bad CRC, using default environment >> >> PCIE0: No link >> PCIE1: No link >> In: serial >> Out: serial >> Err: serial >> Net: eTSEC0, eTSEC1 >> Hit any key to stop autoboot: 0 >> => version >> >> U-Boot 2009.03-00333-g7ee38c0-dirty (Apr 17 2009 - 10:33:36) MPC83XX >> => he usb >> usb reset - reset (rescan) USB controller >> usb tree - show USB device tree >> usb info [dev] - show available USB devices >> >> => usb start >> (Re)start USB... >> USB: Machine check in kernel mode. >> Caused by (from msr): regs 07f1bc80 Unknown values in msr >> NIP: 07FD7CC0 XER: 00000000 LR: 07FD7CA0 REGS: 07f1bc80 TRAP: 0200 DAR: >> 00000000 >> MSR: 0000b030 EE: 1 PR: 0 FP: 1 ME: 1 IR/DR: 11 >> >> GPR00: 07FD7328 07F1BD70 07F1BF44 00000000 00000001 07F1BC50 07F1F638 >> 00000000 >> GPR08: FFFFFFFF 00000000 E0000000 E0023100 42000084 00000000 07FEC000 >> 00000000 >> GPR16: 00000000 07FE072C 07FEB264 07FE6B1C 00000000 00000000 00000000 >> 07F1F588 >> GPR24: 00000000 00000000 00000000 00000000 00000001 00000000 07FE7CA0 >> 07FFB4CC >> Call backtrace: >> 00000001 07FD7328 07FC6D80 07FBBC2C 07FC2234 07FC183C 07FC1A08 >> 07FC46A4 07FA29B8 07FA15E8 >> machine check >> Âesetting the board. >> >> **********************************************************************************************************************/ >> >> >> _______________________________________________ >> U-Boot mailing list >> U-Boot@lists.denx.de >> http://lists.denx.de/mailman/listinfo/u-boot >> >> >> > > _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
