This additional text in the bootup log helps to see if the board is
configured for NAND-booting. Especially helpful for boards that can
boot from NOR and NAND (e.g. most of the AMCC eval boards).
Signed-off-by: Stefan Roese <s...@denx.de>
---
cpu/ppc4xx/cpu.c | 6 +++++-
1 files changed, 5 insertions(+), 1 deletions(-)
diff --git a/cpu/ppc4xx/cpu.c b/cpu/ppc4xx/cpu.c
index d09c4c2..9a6a8d7 100644
--- a/cpu/ppc4xx/cpu.c
+++ b/cpu/ppc4xx/cpu.c
@@ -586,7 +586,11 @@ int checkcpu (void)
#endif /* I2C_BOOTROM */
#if defined(SDR0_PINSTP_SHIFT)
printf (" Bootstrap Option %c - ",
bootstrap_char[bootstrap_option()]);
- printf ("Boot ROM Location %s\n", bootstrap_str[bootstrap_option()]);
+ printf ("Boot ROM Location %s", bootstrap_str[bootstrap_option()]);
+#ifdef CONFIG_NAND_U_BOOT
+ puts(", booting from NAND");
+#endif /* CONFIG_NAND_U_BOOT */
+ putc('\n');
#endif /* SDR0_PINSTP_SHIFT */
#if defined(CONFIG_PCI) && !defined(CONFIG_405EX)
--
1.6.2.3
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
