On 20/09/13 22:01, Piotr Wilczek wrote: > This patchset add support for a new Samsung board Trats2. > Multi i2c file is updated for third soft I2C adapter for Trats2 board > Battery support is added for Trats2. > > This patchset depends on: > http://patchwork.ozlabs.org/patch/245307/ > > Changes in v6: > - fixed build issue for other board. > > Changes in v5: > - updated Maintainer entry > - removed direct access to registers > - in board_mmc_init error is return only if both mmc card init fails > > Changes in v4: > - rebased on the latest tree > - modified default boot envs > > Changes in v3: > - add Maintainer entry > - changed T-flash detect pin to GPX3[3] > - removed MMC_ASYNC > - use only software i2c > > Changes in v2: > - removed lcd callback in panel_info > - changed i2c from hardware to software > - use max77693 multifunction pmic > > Piotr Wilczek (3): > power:battery: add battery support for Trats2 board > samsung:common:i2c: add definions for third soft I2C adapter for > Trats2 board > samsung: trats2: add support for new board Trats2 > > board/samsung/common/multi_i2c.c | 12 + > board/samsung/trats2/Makefile | 34 +++ > board/samsung/trats2/trats2.c | 513 > ++++++++++++++++++++++++++++++++++++ > boards.cfg | 1 + > drivers/power/battery/Makefile | 1 + > drivers/power/battery/bat_trats2.c | 65 +++++ > include/configs/trats2.h | 311 ++++++++++++++++++++++ > 7 files changed, 937 insertions(+) > create mode 100644 board/samsung/trats2/Makefile > create mode 100644 board/samsung/trats2/trats2.c > create mode 100644 drivers/power/battery/bat_trats2.c > create mode 100644 include/configs/trats2.h >
applied to u-boot-samsung. Thanks, Minkyu Kang. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
