On Thu, Sep 19, 2013 at 5:13 PM, Javier Martinez Canillas
<javier.marti...@collabora.co.uk> wrote:
> On 09/19/2013 05:00 PM, Igor Grinberg wrote:
>> Hi Javier,
>>
>> On 09/19/2013 04:04 PM, Javier Martinez Canillas wrote:
>>> On Mon, Sep 2, 2013 at 1:52 PM, Enric Balletbo Serra
>>> <eballe...@gmail.com> wrote:
>>>> 2013/9/2 Javier Martinez Canillas <jav...@dowhile0.org>:
>>>>> There seems to be a naming convention for the configuration
>>>>> files for boards using the same SoC family. This makes
>>>>> easier to do changes that affect different boards based
>>>>> on the same SoC.
>>>>>
>>>>> Since the IGEPv2 board and the IGEP COM Module use a TI
>>>>> OMAP35xx/DM37xx processor, is better to rename its board
>>>>> config to use this naming scheme.
>>>>>
>>>>> Signed-off-by: Javier Martinez Canillas <javier.marti...@collabora.co.uk>
>>>>> ---
>>>>>
>>>>> Changes since v1:
>>>>> - Fix some issues in the commit changelog pointed out by Enric Balletbo.
>>>>>
>>>>> boards.cfg | 10 +-
>>>>> include/configs/igep00x0.h | 370
>>>>> ---------------------------------------
>>>>> include/configs/omap3_igep00x0.h | 370
>>>>> +++++++++++++++++++++++++++++++++++++++
>>>>> 3 files changed, 375 insertions(+), 375 deletions(-)
>>>>> delete mode 100644 include/configs/igep00x0.h
>>>>> create mode 100644 include/configs/omap3_igep00x0.h
>>>>>
>>>>> diff --git a/boards.cfg b/boards.cfg
>>>>> index d717226..8f1cb6e 100644
>>>>> --- a/boards.cfg
>>>>> +++ b/boards.cfg
>>>>> @@ -297,11 +297,11 @@ omap3_overo arm armv7
>>>>> overo -
>>>>> omap3_pandora arm armv7 pandora
>>>>> - omap3
>>>>> dig297 arm armv7 dig297
>>>>> comelit omap3
>>>>> cm_t35 arm armv7 cm_t35
>>>>> compulab omap3
>>>>> -igep0020 arm armv7 igep00x0
>>>>> isee omap3
>>>>> igep00x0:MACH_TYPE=MACH_TYPE_IGEP0020,BOOT_ONENAND
>>>>> -igep0020_nand arm armv7 igep00x0
>>>>> isee omap3
>>>>> igep00x0:MACH_TYPE=MACH_TYPE_IGEP0020,BOOT_NAND
>>>>> -igep0030 arm armv7 igep00x0
>>>>> isee omap3
>>>>> igep00x0:MACH_TYPE=MACH_TYPE_IGEP0030,BOOT_ONENAND
>>>>> -igep0030_nand arm armv7 igep00x0
>>>>> isee omap3
>>>>> igep00x0:MACH_TYPE=MACH_TYPE_IGEP0030,BOOT_NAND
>>>>> -igep0032 arm armv7 igep00x0
>>>>> isee omap3
>>>>> igep00x0:MACH_TYPE=MACH_TYPE_IGEP0032,BOOT_ONENAND
>>>>> +omap3_igep0020 arm armv7 igep00x0
>>>>> isee omap3
>>>>> omap3_igep00x0:MACH_TYPE=MACH_TYPE_IGEP0020,BOOT_ONENAND
>>>>> +omap3_igep0020_nand arm armv7 igep00x0
>>>>> isee omap3
>>>>> omap3_igep00x0:MACH_TYPE=MACH_TYPE_IGEP0020,BOOT_NAND
>>>>> +omap3_igep0030 arm armv7 igep00x0
>>>>> isee omap3
>>>>> omap3_igep00x0:MACH_TYPE=MACH_TYPE_IGEP0030,BOOT_ONENAND
>>>>> +omap3_igep0030_nand arm armv7 igep00x0
>>>>> isee omap3
>>>>> omap3_igep00x0:MACH_TYPE=MACH_TYPE_IGEP0030,BOOT_NAND
>>>>> +omap3_igep0032 arm armv7 igep00x0
>>>>> isee omap3
>>>>> omap3_igep00x0:MACH_TYPE=MACH_TYPE_IGEP0032,BOOT_ONENAND
>>>>> am335x_igep0033 arm armv7 igep0033
>>>>> isee am33xx
>>>>> am3517_evm arm armv7 am3517evm
>>>>> logicpd omap3
>>>>> mt_ventoux arm armv7 mt_ventoux
>>>>> teejet omap3
>>>
>>>> Acked-by: Enric Balletbo i Serra <eballe...@iseebcn.com>
>>>
>>> These patches don't apply on master anymore after commit 27af930e9
>>> ("Merge and reformat boards.cfg and MAINTAINERS"). I'll rebase the
>>> patches and repost.
>>
>> If you are about to repost, can you please add '-M' flag to
>> git format-patch command (if you use this command).
>> This will detect renames and lower the patch size...
>>
>
> Hi Igor,
>
> Yes I do use git format-patch and I'll use -M for the next version.
>
> Thanks for the feedback and best regards,
> Javier
Hi Igor,
Yes I do use git format-patch and I'll use -M for the next version.
Thanks for the feedback and best regards,
Javier
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
