On 09/19/2013 05:00 PM, Igor Grinberg wrote:
> Hi Javier,
>
> On 09/19/2013 04:04 PM, Javier Martinez Canillas wrote:
>> On Mon, Sep 2, 2013 at 1:52 PM, Enric Balletbo Serra
>> <eballe...@gmail.com> wrote:
>>> 2013/9/2 Javier Martinez Canillas <jav...@dowhile0.org>:
>>>> There seems to be a naming convention for the configuration
>>>> files for boards using the same SoC family. This makes
>>>> easier to do changes that affect different boards based
>>>> on the same SoC.
>>>>
>>>> Since the IGEPv2 board and the IGEP COM Module use a TI
>>>> OMAP35xx/DM37xx processor, is better to rename its board
>>>> config to use this naming scheme.
>>>>
>>>> Signed-off-by: Javier Martinez Canillas <javier.marti...@collabora.co.uk>
>>>> ---
>>>>
>>>> Changes since v1:
>>>> - Fix some issues in the commit changelog pointed out by Enric Balletbo.
>>>>
>>>> boards.cfg | 10 +-
>>>> include/configs/igep00x0.h | 370
>>>> ---------------------------------------
>>>> include/configs/omap3_igep00x0.h | 370
>>>> +++++++++++++++++++++++++++++++++++++++
>>>> 3 files changed, 375 insertions(+), 375 deletions(-)
>>>> delete mode 100644 include/configs/igep00x0.h
>>>> create mode 100644 include/configs/omap3_igep00x0.h
>>>>
>>>> diff --git a/boards.cfg b/boards.cfg
>>>> index d717226..8f1cb6e 100644
>>>> --- a/boards.cfg
>>>> +++ b/boards.cfg
>>>> @@ -297,11 +297,11 @@ omap3_overo arm armv7
>>>> overo -
>>>> omap3_pandora arm armv7 pandora
>>>> - omap3
>>>> dig297 arm armv7 dig297
>>>> comelit omap3
>>>> cm_t35 arm armv7 cm_t35
>>>> compulab omap3
>>>> -igep0020 arm armv7 igep00x0
>>>> isee omap3
>>>> igep00x0:MACH_TYPE=MACH_TYPE_IGEP0020,BOOT_ONENAND
>>>> -igep0020_nand arm armv7 igep00x0
>>>> isee omap3
>>>> igep00x0:MACH_TYPE=MACH_TYPE_IGEP0020,BOOT_NAND
>>>> -igep0030 arm armv7 igep00x0
>>>> isee omap3
>>>> igep00x0:MACH_TYPE=MACH_TYPE_IGEP0030,BOOT_ONENAND
>>>> -igep0030_nand arm armv7 igep00x0
>>>> isee omap3
>>>> igep00x0:MACH_TYPE=MACH_TYPE_IGEP0030,BOOT_NAND
>>>> -igep0032 arm armv7 igep00x0
>>>> isee omap3
>>>> igep00x0:MACH_TYPE=MACH_TYPE_IGEP0032,BOOT_ONENAND
>>>> +omap3_igep0020 arm armv7 igep00x0
>>>> isee omap3
>>>> omap3_igep00x0:MACH_TYPE=MACH_TYPE_IGEP0020,BOOT_ONENAND
>>>> +omap3_igep0020_nand arm armv7 igep00x0
>>>> isee omap3
>>>> omap3_igep00x0:MACH_TYPE=MACH_TYPE_IGEP0020,BOOT_NAND
>>>> +omap3_igep0030 arm armv7 igep00x0
>>>> isee omap3
>>>> omap3_igep00x0:MACH_TYPE=MACH_TYPE_IGEP0030,BOOT_ONENAND
>>>> +omap3_igep0030_nand arm armv7 igep00x0
>>>> isee omap3
>>>> omap3_igep00x0:MACH_TYPE=MACH_TYPE_IGEP0030,BOOT_NAND
>>>> +omap3_igep0032 arm armv7 igep00x0
>>>> isee omap3
>>>> omap3_igep00x0:MACH_TYPE=MACH_TYPE_IGEP0032,BOOT_ONENAND
>>>> am335x_igep0033 arm armv7 igep0033
>>>> isee am33xx
>>>> am3517_evm arm armv7 am3517evm
>>>> logicpd omap3
>>>> mt_ventoux arm armv7 mt_ventoux
>>>> teejet omap3
>>
>>> Acked-by: Enric Balletbo i Serra <eballe...@iseebcn.com>
>>
>> These patches don't apply on master anymore after commit 27af930e9
>> ("Merge and reformat boards.cfg and MAINTAINERS"). I'll rebase the
>> patches and repost.
>
> If you are about to repost, can you please add '-M' flag to
> git format-patch command (if you use this command).
> This will detect renames and lower the patch size...
>
Hi Igor,
Yes I do use git format-patch and I'll use -M for the next version.
Thanks for the feedback and best regards,
Javier
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
