Hello Michael,

a "How to send patches", Jagan Teki responded to you, so I only comment
your patch ...

Am 17.09.2013 19:29, schrieb Michael Burr:
Zynq PS has two I2C bus masters (called 'I2C0' and 'I2C1'):
Implement 'i2c_set_bus_num' routine to select from these.
Support I2C devices which do not use internal addresses:
Handle case of 'alen == 0' in 'i2c_read', 'i2c_write'.
This supports PCA9548 bus multiplexer on Xilinx ZC702 board.
Tested cases of 'alen == 0' and 'alen == 1' on this board.
Further minor corrections:
Write 'address' register before 'data' register.
Write 'transfer_size' register before 'address' register.

Signed-off-by: Michael Burr<michael.b...@logicpd.com>
Cc: Albert Aribaud<albert.u.b...@aribaud.net>
Cc: Heiko Schocher<h...@denx.de>
Cc: Michal Simek<mon...@monstr.eu>
---
  drivers/i2c/zynq_i2c.c |   87 ++++++++++++++++++++++++++++++------------------
  1 file changed, 55 insertions(+), 32 deletions(-)

Thanks for your work!

But please use the new i2c multibus/multiadapter framework for adding
multibus support for this driver. Currently 4 i2c drivers are ported
to this new framework, see:

http://git.denx.de/?p=u-boot.git;a=commitdiff;h=880540decfb855e96bc14ac84ac7784669e4b382
http://git.denx.de/?p=u-boot.git;a=commitdiff;h=1f2ba722ac06393d6abe6d4734824d3b98ea9108
http://git.denx.de/?p=u-boot.git;a=commitdiff;h=00f792e0df9ae942427e44595a0f4379582accee
http://git.denx.de/?p=u-boot.git;a=commitdiff;h=ea818dbbcd59300b56014ac2d67798a54994eb9b

You can use them as a base for your work

bye,
Heiko
--
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to