Hi Eric, On 12/09/2013 17:02, Eric Nelson wrote:
> This isn't needed yet in the stock (main-line) code base, since > we haven't added any panels without detection. ok, thanks - I will then apply Fabio's patches for the Freescale's boards. > > We do have a form this patch and a lot of panels in our local tree > on Github, but wanted to avoid unnecessary noise on the list > because we've integrated a dozen or so panels and the existing > structure really doesn't scale. > > We had a separate discussion regarding treating the displays > as data (environment), but have stalled somewhat on that front. I think also that using the environment seems a clumsy solution. We used a lot of times in the past, and we have not unified their usage. > > The current device-tree code for i.MX6 uses mode strings instead > of the detailed timing data that's really needed for a proper > solution. > I admit that using DT also for u-boot seems a better solution. You're right about i.MX6 in kernel, but on the other hand I like how it is described for i.MX28 boards. The display-timings node contain all information we need. It would be nice to have the same for i.MX6. Best regards, Stefano -- ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sba...@denx.de ===================================================================== _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
