NAND_ECC_SOFT was the only option available while the SOFT_BCH option
may also be used.
Signed-off-by: Valentin Longchamp <valentin.longch...@keymile.com>
Acked-by: Scott Wood <scottw...@freescale.com>
---
Changes in v3: None
Changes in v2: None
drivers/mtd/nand/fsl_elbc_nand.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c
index 7952097..2f31fc9 100644
--- a/drivers/mtd/nand/fsl_elbc_nand.c
+++ b/drivers/mtd/nand/fsl_elbc_nand.c
@@ -759,8 +759,12 @@ static int fsl_elbc_chip_init(int devnum, u8 *addr)
nand->ecc.steps = 1;
nand->ecc.strength = 1;
} else {
- /* otherwise fall back to default software ECC */
+ /* otherwise fall back to software ECC */
+#if defined(CONFIG_NAND_ECC_BCH)
+ nand->ecc.mode = NAND_ECC_SOFT_BCH;
+#else
nand->ecc.mode = NAND_ECC_SOFT;
+#endif
}
ret = nand_scan_ident(mtd, 1, NULL);
--
1.8.0.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
