This is necessary with the new I2C subystem that was introduced lately.
Signed-off-by: Valentin Longchamp <valentin.longch...@keymile.com>
---
Changes in v3: None
Changes in v2: None
arch/powerpc/cpu/mpc8xxx/ddr/main.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/main.c
b/arch/powerpc/cpu/mpc8xxx/ddr/main.c
index 842bf19..9032edf 100644
--- a/arch/powerpc/cpu/mpc8xxx/ddr/main.c
+++ b/arch/powerpc/cpu/mpc8xxx/ddr/main.c
@@ -69,7 +69,11 @@ u8
spd_i2c_addr[CONFIG_NUM_DDR_CONTROLLERS][CONFIG_DIMM_SLOTS_PER_CTLR] = {
static void __get_spd(generic_spd_eeprom_t *spd, u8 i2c_address)
{
- int ret = i2c_read(i2c_address, 0, 1, (uchar *)spd,
+ int ret;
+
+ i2c_set_bus_num(CONFIG_SYS_SPD_BUS_NUM);
+
+ ret = i2c_read(i2c_address, 0, 1, (uchar *)spd,
sizeof(generic_spd_eeprom_t));
if (ret) {
--
1.8.0.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
