Enable the bootcount driver for am335x in general. We leave adding a bootlimit and altbootcmd to the environment to the board ports.
Signed-off-by: Tom Rini <tr...@ti.com> --- drivers/bootcount/Makefile | 1 + include/configs/ti_am335x_common.h | 7 +++++++ 2 files changed, 8 insertions(+) diff --git a/drivers/bootcount/Makefile b/drivers/bootcount/Makefile index 2b517b6..352a0a1 100644 --- a/drivers/bootcount/Makefile +++ b/drivers/bootcount/Makefile @@ -10,6 +10,7 @@ COBJS-y += bootcount.o COBJS-$(CONFIG_AT91SAM9XE) += bootcount_at91.o COBJS-$(CONFIG_BLACKFIN) += bootcount_blackfin.o COBJS-$(CONFIG_SOC_DA8XX) += bootcount_davinci.o +COBJS-$(CONFIG_AM33XX) += bootcount_davinci.o COBJS-$(CONFIG_BOOTCOUNT_RAM) += bootcount_ram.o COBJS := $(COBJS-y) diff --git a/include/configs/ti_am335x_common.h b/include/configs/ti_am335x_common.h index fd3ffab..066618e 100644 --- a/include/configs/ti_am335x_common.h +++ b/include/configs/ti_am335x_common.h @@ -41,6 +41,13 @@ #define CONFIG_BOOTP_SUBNETMASK #define CONFIG_NET_RETRY_COUNT 10 +/* + * RTC related defines. To use bootcount you must set bootlimit in the + * environment to a non-zero value. + */ +#define CONFIG_BOOTCOUNT_LIMIT +#define CONFIG_SYS_BOOTCOUNT_ADDR 0x44E3E000 + /* SPL defines. */ #define CONFIG_SPL_TEXT_BASE 0x402F0400 #define CONFIG_SPL_MAX_SIZE (0x4030C000 - CONFIG_SPL_TEXT_BASE) -- 1.7.9.5 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
