On Tue, Jul 09, 2013 at 09:43:17AM +0200, Naumann Andreas wrote:

> In chapter 'Advisory 2.1 USB Host Clock Drift Causes USB Spec
> Non-compliance in Certain Configurations' of the TI Errata it is
> recommended to use certain div/mult values for the DPLL5 clock setup.
> So far u-boot used the old 34xx values, so I added the errata
> recommended values specificly for 36xx init only.  Also, the FSEL
> registers exist no longer, so removed them from init.
> 
> Tested this on a AM3703 board with 19.2MHz oscillator, which
> previously couldnt lock the dpll5 (kernel complained). As a
> consequence the EHCI USB port wasnt usable in U-Boot and kernel. With
> this patch, kernel panics disappear and USB working fine in u-boot and
> kernel.
> 
> Signed-off-by: Andreas Naumann <anaum...@ultratronik.de>

Applied to u-boot-ti/master with a prototype added to
<asm/arch-omap3/clock.h> to avoid a warning.

-- 
Tom

Attachment: signature.asc
Description: Digital signature

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to