If this #define stays in config_mpc85xx.h, the P2041 based boards must define a lot of SRIO values even if they do not implement a SRIO device.
The #define is moved into the P2041RDB board config file where it is used. Signed-off-by: Valentin Longchamp <valentin.longch...@keymile.com> --- include/configs/P2041RDB.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/configs/P2041RDB.h b/include/configs/P2041RDB.h index 4ea8717..523117b 100644 --- a/include/configs/P2041RDB.h +++ b/include/configs/P2041RDB.h @@ -399,6 +399,7 @@ unsigned long get_board_sys_clk(unsigned long dummy); * for slave u-boot IMAGE instored in master memory space, * PHYS must be aligned based on the SIZE */ +#define CONFIG_SYS_FSL_SRIO_PCIE_BOOT_MASTER #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef080000ull #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff80000ull #define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE 0x80000 /* 512K */ -- 1.8.0.1 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
