From: Dennis Gilmore <den...@ausil.us>
Signed-off-by: Dennis Gilmore <den...@ausil.us>
---
include/configs/wandboard.h | 42 +++++++++++++++++++++++++++++++++++++++---
1 file changed, 39 insertions(+), 3 deletions(-)
diff --git a/include/configs/wandboard.h b/include/configs/wandboard.h
index ee6bf21..a5052c5 100644
--- a/include/configs/wandboard.h
+++ b/include/configs/wandboard.h
@@ -58,6 +58,8 @@
#define CONFIG_LOADADDR 0x12000000
#define CONFIG_SYS_TEXT_BASE 0x17800000
+#define CONFIG_SUPPORT_RAW_INITRD
+
/* MMC Configuration */
#define CONFIG_FSL_ESDHC
#define CONFIG_FSL_USDHC
@@ -72,6 +74,14 @@
#define CONFIG_CMD_FAT
#define CONFIG_DOS_PARTITION
+/* PXE support */
+#define CONFIG_BOOTP_PXE
+#define CONFIG_BOOTP_PXE_CLIENTARCH 0x100
+#define CONFIG_BOOTP_VCI_STRING "U-boot.armv7.wandboard"
+#define CONFIG_CMD_PXE
+#define CONFIG_MENU
+
+
/* Ethernet Configuration */
#define CONFIG_CMD_PING
#define CONFIG_CMD_DHCP
@@ -117,7 +127,32 @@
"initrd_high=0xffffffff\0" \
"fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
"fdt_addr=0x11000000\0" \
+ "pxefile_addr_r=0x12000000\0" \
+ "kernel_addr_r=0x13000000\0" \
+ "ramdisk_addr_r=0x32000000\0" \
+ "fdt_addr_r=0x11000000\0" \
"boot_fdt=try\0" \
+ "bootcmd_setup=mmc rescan\0" \
+ "bootcmd_pxe=setenv bootfile \"\" ;dhcp; pxe get; pxe boot\0" \
+ "bootcmd_disk_scr=ext2load ${boot_ifc} ${bootdevice} ${scr_addr_r}
boot.scr && source ${scr_addr_r}\0" \
+ "bootcmd_disk_sysboot1=setenv bootfile /boot/extlinux/extlinux.conf;
sysboot ${boot_ifc} ${bootdevice} ext2\0" \
+ "bootcmd_disk_sysboot2=setenv bootfile /extlinux/extlinux.conf; sysboot
${boot_ifc} ${bootdevice} ext2\0" \
+ "bootcmd_disk_uenv=ext2load ${boot_ifc} ${bootdevice} ${uenv_addr_r}
uEnv.txt; env import -t ${uenv_addr_r} ${filesize}; run bootcmd_uenv\0" \
+ "bootcmd_disk_kernel=ext2load ${boot_ifc} ${bootdevice}
${kernel_addr_r} vmlinuz && ext2load ${boot_ifc} ${bootdevice}
${ramdisk_addr_r} initrd.img && bootz ${kernel_addr_r}
${ramdisk_addr_r}:${filesize} ${fdt_addr}\0" \
+ "bootcmd_disk=run bootcmd_disk_sysboot1; run bootcmd_disk_sysboot2; run
bootcmd_disk_uenv; run bootcmd_disk_scr; run bootcmd_disk_kernel\0" \
+ "bootcmd_sata=setenv boot_ifc scsi; scsi scan && run bootcmd_disk\0" \
+ "bootcmd_mmc=setenv boot_ifc mmc; mmc rescan && run bootcmd_disk\0" \
+ "bootcmd_default=run bootcmd_mmc; run bootcmd_sata; run bootcmd_pxe\0" \
+ "bootcmd0=run bootcmd_setup; run bootcmd_default\0" \
+ "bootcmd1=run bootcmd_setup; run bootcmd_pxe; run bootcmd_default\0" \
+ "bootcmd2=run bootcmd_setup; run bootcmd_sata; run bootcmd_default\0" \
+ "bootcmd15=run bootcmd_setup; run bootcmd_mmc; run bootcmd_default\0" \
+ "localcmd=run bootcmd_sata\0" \
+ "bootdevice=0\0" \
+ "bootargs=console=ttymxc0 root=LABEL=rootfs\0" \
+ "bootdelay=2\0" \
+ "bootretry=90\0" \
+ "netretry=once\0" \
"ip_dyn=yes\0" \
"mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
"mmcpart=1\0" \
@@ -139,11 +174,11 @@
"mmcargs=setenv bootargs console=${console},${baudrate} " \
"root=${mmcroot}\0" \
"loadbootscript=" \
- "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
+ "load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
"bootscript=echo Running bootscript from mmc ...; " \
"source\0" \
- "loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \
- "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
+ "loaduimage=load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \
+ "loadfdt=load mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
"mmcboot=echo Booting from mmc ...; " \
"run mmcargs; " \
"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
@@ -186,6 +221,7 @@
#define CONFIG_BOOTCOMMAND \
"mmc dev ${mmcdev}; if mmc rescan; then " \
+ "run bootcmd_default; " \
"if run loadbootscript; then " \
"run bootscript; " \
"else " \
--
1.8.3.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
