CONFIG_CMD_HDMIDETECT
CONFIG_CMD_BMODE
Signed-off-by: Robert Winkler <robert.wink...@boundarydevices.com>
---
README | 15 +++++++++++++++
1 file changed, 15 insertions(+)
diff --git a/README b/README
index bcfffc3..3a7cf4e 100644
--- a/README
+++ b/README
@@ -2598,6 +2598,21 @@ CBFS (Coreboot Filesystem) support
Note: There is also a sha1sum command, which should perhaps
be deprecated in favour of 'hash sha1'.
+- Freescale i.MX specific commands:
+ CONFIG_CMD_HDMIDETECT
+ This enables 'hdmidet' command which returns true if an
+ HDMI monitor is detected. This command is i.MX 6 specific.
+
+ CONFIG_CMD_BMODE
+ This enables the 'bmode' (bootmode) command for forcing
+ a boot from specific media.
+
+ This is useful for forcing the ROM's usb downloader to
+ activate upon a watchdog reset which is nice when iterating
+ on U-Boot. Using the reset button or running bmode normal
+ will set it back to normal. This command currently
+ supports i.MX 53 and i.MX 6.
+
- Signing support:
CONFIG_RSA
--
1.8.3.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
