Add a __weak function that can be overridden to reset devices attached to an ehci devices after the FEAT_POWER has been submitted
Signed-off-by: Dan Murphy <dmur...@ti.com> --- drivers/usb/host/ehci-hcd.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index 706cf0c..fdd3994 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -616,6 +616,11 @@ __weak uint32_t *ehci_get_portsc_register(struct ehci_hcor *hcor, int port) return (uint32_t *)&hcor->or_portsc[port]; } +__weak void ehci_reset_attached_devices(int port) +{ + return; +} + int ehci_submit_root(struct usb_device *dev, unsigned long pipe, void *buffer, int length, struct devrequest *req) @@ -777,6 +782,7 @@ ehci_submit_root(struct usb_device *dev, unsigned long pipe, void *buffer, reg |= EHCI_PS_PP; ehci_writel(status_reg, reg); } + ehci_reset_attached_devices(port); break; case USB_PORT_FEAT_RESET: if ((reg & (EHCI_PS_PE | EHCI_PS_CS)) == EHCI_PS_CS && @@ -794,6 +800,7 @@ ehci_submit_root(struct usb_device *dev, unsigned long pipe, void *buffer, reg |= EHCI_PS_PR; reg &= ~EHCI_PS_PE; ehci_writel(status_reg, reg); + /* * caller must wait, then call GetPortStatus * usb 2.0 specification say 50 ms resets on -- 1.7.9.5 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot