On Tue, Jul 2, 2013 at 6:41 AM, Robert Nelson <robertcnel...@gmail.com> wrote:
> On Tue, Jul 2, 2013 at 2:39 AM, Simon Glass <s...@chromium.org> wrote:
>> Hi Robert,
>>
>> On Tue, Jul 2, 2013 at 5:44 AM, Robert Nelson <robertcnel...@gmail.com>
>> wrote:
>>>
>>> On Fri, Jun 28, 2013 at 5:12 PM, Tom Rini <tr...@ti.com> wrote:
>>> > Hey all,
>>> >
>>> > I've tagged and pushed v2013.07-rc2. A bit more over the place than I
>>> > should have gone, but picked up a lot of things that have been
>>> > outstanding for a while. The big thing is a refactor of the boot loop.
>>> > Everything should be working right now, but please test. Related to
>>> > this is the ability to have crytpographically signed images. It's like
>>> > secure boot in UEFI land, but hopefully without the kerfuffle.
>>> >
>>> > If you've got changes outstanding still, please start gently poking
>>> > custodians with patchwork links. I've got a good bit of stuff I need to
>>> > deal with myself still, but please prod me all the same.
>>>
>>> So, the bootm refactor ( 35fc84fa1ff51e15ecd3e464dac87eb105ffed30 )
>>> also broke bootz/zImage...
>>>
>>> Got it to atleast get past the "invalid OS" message via:
>>>
>>> diff --git a/common/cmd_bootm.c b/common/cmd_bootm.c
>>> index 02a5013..a0b55ef 100644
>>> --- a/common/cmd_bootm.c
>>> +++ b/common/cmd_bootm.c
>>> @@ -1744,6 +1744,12 @@ static int bootz_start(cmd_tbl_t *cmdtp, int
>>> flag, int argc,
>>> int ret;
>>> void *zi_start, *zi_end;
>>>
>>> + memset(images, 0, sizeof(bootm_headers_t));
>>> +
>>> + boot_start_lmb(images);
>>> +
>>> + images->os.os = IH_OS_LINUX;
>>> +
>>> ret = do_bootm_states(cmdtp, flag, argc, argv, BOOTM_STATE_START,
>>> images, 1);
>>>
>>> However it's still locking up at "Starting Kernel ..."
>>
>>
>> What board is this please? I have only tested on x86, but perhaps have
>> missed something here.
>
> So far it looks like any arm board... I was working on specifically
> the imx6 quad core wandboard bringup. But i've also verified it on
> the Panda/Beagle too... Alll 3 of these boards worked fine with
> v2013.07-rc1...
>
> Wandboard:
>
> Boot Sequence: (device tree boot)
> load mmc ${mmcdev}:${mmcpart} ${loadaddr} zImage
> load mmc ${mmcdev}:${mmcpart} ${fdt_addr} /dtbs/${fdt_file}
> bootz ${loadaddr} - ${fdt_addr}
>
> U-Boot 2013.07-rc2-00001-g23c15c2-dirty (Jul 02 2013 - 06:33:59)
>
> CPU: Freescale i.MX6Q rev1.2 at 792 MHz
> Reset cause: POR
> Board: Wandboard
> DRAM: 2 GiB
> MMC: FSL_SDHC: 0, FSL_SDHC: 1
> *** Warning - bad CRC, using default environment
>
> In: serial
> Out: serial
> Err: serial
> Net: FEC [PRIME]
> Warning: FEC using MAC address from net device
>
> Hit any key to stop autoboot: 0
> => load mmc ${mmcdev}:${mmcpart} ${loadaddr} zImage
> 4112496 bytes read in 307 ms (12.8 MiB/s)
> => load mmc ${mmcdev}:${mmcpart} ${fdt_addr} /dtbs/${fdt_file}
> 22150 bytes read in 126 ms (170.9 KiB/s)
> => bootz ${loadaddr} - ${fdt_addr}
<hardlock>
Missed the important detail...
Regards,
--
Robert Nelson
http://www.rcn-ee.com/
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
