If hwconfig does not contains "en_cpc" then by default all cpcs are enabled
If this config is defined then only those individual cpcs which are defined
in the subargument of "en_cpc" will be enabled e.g en_cpc:cpc1,cpc2; (this
will enable cpc1 and cpc2) or en_cpc:cpc2; (this enables just cpc2)
Signed-off-by: Sandeep Singh <sand...@freescale.com>
---
arch/powerpc/cpu/mpc85xx/cpu_init.c | 32 ++++++++++++++++++++++++++++++++
1 files changed, 32 insertions(+), 0 deletions(-)
diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init.c
b/arch/powerpc/cpu/mpc85xx/cpu_init.c
index 185e0d5..ea75ce5 100644
--- a/arch/powerpc/cpu/mpc85xx/cpu_init.c
+++ b/arch/powerpc/cpu/mpc85xx/cpu_init.c
@@ -159,11 +159,43 @@ void config_8560_ioports (volatile ccsr_cpm_t * cpm)
static void enable_cpc(void)
{
int i;
+ int arglen;
+ int ret;
u32 size = 0;
cpc_corenet_t *cpc = (cpc_corenet_t *)CONFIG_SYS_FSL_CPC_ADDR;
+ char buffer[HWCONFIG_BUFFER_SIZE];
+ char cpc_subarg[16];
+ bool have_hwconfig = 0;
+ const char *cpc_args = NULL;
+
+ /*
+ * Extract hwconfig from environment since environment
+ * is not setup properly yet
+ */
+ ret = getenv_f("hwconfig", buffer, sizeof(buffer));
+ if (ret == -1) {
+ printf("Error getting hwconfig\n");
+ return;
+ }
+
+ /*
+ * If "en_cpc" is not defined in hwconfig then by default all
+ * cpcs are enable. If this config is defined then individual
+ * cpcs which have to be enabled should also be defined.
+ * e.g en_cpc:cpc1,cpc2;
+ */
+ if (hwconfig_f("en_cpc", buffer))
+ have_hwconfig = 1;
for (i = 0; i < CONFIG_SYS_NUM_CPC; i++, cpc++) {
+ sprintf(cpc_subarg, "cpc%u", i + 1);
+ if (have_hwconfig) {
+ cpc_args = hwconfig_sub_f("en_cpc", cpc_subarg, buffer);
+ if (cpc_args == NULL)
+ continue;
+ }
+
u32 cpccfg0 = in_be32(&cpc->cpccfg0);
size += CPC_CFG0_SZ_K(cpccfg0);
#if defined(CONFIG_RAMBOOT_PBL) || defined(CONFIG_SECURE_HKAREA_CPC)
--
1.7.6.GIT
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
