Hi Sascha, On Mon, 27 May 2013 11:42:26 +0200, Sascha Silbe <t-ub...@infra-silbe.de> wrote:
> U-Boot has become slightly larger than where the environment sector > was previously located. Saving the environment would brick the device. > > Relocate the environment to where it is with the stock (i.e. Marvell > USP) U-Boot version. That should give plenty of room for U-Boot to > grow, including local customisations. > > This obviously breaks compatibility with previous mainline versions of > U-Boot. Users will need to back up the environment before an update > and restore it afterwards, or manually copy it to the new address > before the update. > > Signed-off-by: Sascha Silbe <t-ub...@infra-silbe.de> > --- > include/configs/openrd.h | 4 ++-- > 1 file changed, 2 insertions(+), 2 deletions(-) > > diff --git a/include/configs/openrd.h b/include/configs/openrd.h > index 53bafe1..ea7f9aa 100644 > --- a/include/configs/openrd.h > +++ b/include/configs/openrd.h > @@ -90,8 +90,8 @@ > * it has to be rounded to sector size > */ > #define CONFIG_ENV_SIZE 0x20000 /* 128k */ > -#define CONFIG_ENV_ADDR 0x60000 > -#define CONFIG_ENV_OFFSET 0x60000 /* env starts here */ > +#define CONFIG_ENV_ADDR 0xa0000 > +#define CONFIG_ENV_OFFSET 0xa0000 /* env starts here */ > > /* > * Default environment variables CC:ing Tom. This patch is for 2013.10, not 2013.07, but I prefer raising the issue as early as possible. If there is no way to make things smoother, then I think the 2013.10 release notes should contain a red, blinking, paragraph about this. I would *hate* it if people were not warned and given a method to port their current environment setting over. Possibly even, the 2013.07 could have a warning about the change to come, so that people have a better chance yet to prepare for the change. Amicalement, -- Albert. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
