On Thu, Jun 6, 2013 at 11:02 AM, Michal Simek <mon...@monstr.eu> wrote: > move this discussion back to mailing list. > > On 06/05/2013 05:56 PM, Jagan Teki wrote: >>>>> And are your ok with below representation for common id's parts ? >>>>> + .name = "W25Q80BL/W25Q80BV", >>>>> + .name = "W25Q16CL/W25Q16DV", >>>>> + .name = "W25Q32BV/W25Q32FV_SPI", >>>>> + .name = "W25Q64CV/W25Q64FV_SPI", >>>>> + .name = "W25Q128BV/W25Q128FV_SPI", >>>>> + .name = "W25Q32DW/W25Q32FV_QPI", >>>>> + .name = "W25Q64DW/W25Q64FV_QPI", >>>>> + .name = "W25Q128FW/W25Q128FV_QPI", >>>> >>>> Any comments on above representation of part names, as the id's to >>>> these pairs are common. >>>> This will enhance u-boot sf to support all parts from winbond, but >>>> seems like different view of names. >>>> >>> >>> what's the difference between that parts? >> >> parts were diff in terms of voltages and sone SPI and QPI configurations. >> but from the manufacture defeat, pair of parts were same ID's > > ok. > >>> Does software care if it is W25G80BL or BV? >>> Or software behaviour is the same and there is only difference in voltage >>> or so. >> >> SW is same even if it 1.8 or 3.3 v. >> The only reason for giving the pair of names to support all different parts > > You are supporting them but you are just not list them. > >>> I don't care about it so much but it is increase u-boot size. >> Why does u-boot size increase, is it because of below representation >> on name filed >> = "W25Q80BL/W25Q80BV" > > Just because of longer names which go probably to rodata section. > > It is not a problem for me at all.
OK, I can go ahead to applied these. Let me know for any more concerns. -- Thanks, Jagan. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
