On Tue, Jun 04, 2013 at 09:03:12AM +0200, Heiko Schocher wrote: > Hello Lubomir, > > Am 04.06.2013 08:49, schrieb Lubomir Popov: > > Hi Heiko, > > > > On 04/06/13 07:26, Heiko Schocher wrote: > >> Hello Lubomir, > >> > >> Am 03.06.2013 07:13, schrieb Heiko Schocher: > >>> Hello Lubomir, > >>> > >>> Am 02.06.2013 13:42, schrieb Lubomir Popov: > >>>>> Hello Lubomir, > >>>>> > >>>>> Am 01.06.2013 18:44, schrieb Lubomir Popov: > >>>>>> New i2c_read, i2c_write and i2c_probe functions, tested on OMAP4 > >>>>>> (4430/60/70), OMAP5 (5430) and AM335X (3359); should work on older > >>>>>> OMAPs and derivatives as well. The only anticipated exception would > >>>>>> be the OMAP2420, which shall require driver modification. > >>> [...] > >>>>>> drivers/i2c/omap24xx_i2c.c | 490 > >>>>>> +++++++++++++++++++++++++++------------------ > >>>>>> 1 file changed, 299 insertions(+), 191 deletions(-) > >>>>> > >>>>> Tested on 3 arm335x based boards, which one uses i2c in SPL > >>>>> code for getting ram parameters, so: > >>>>> > >>>>> Tested-by: Heiko Schocher <h...@denx.de> > >>>> Many thanks for testing, to Tom as well (he did it on the > >>>> Beagleboards, but for one of the older versions, V3 I believe, > >>>> right?). > >>>> When it comes to versions, I see that V1 and V2 are still listed > >>>> in patchwork, probably because of slightly different wording of > >>>> the subject: > >>>> http://patchwork.ozlabs.org/patch/233823/ > >>>> http://patchwork.ozlabs.org/patch/246204/ > >>>> Could you or Tom clean this up, please? Thanks. > >>> > >>> Cleared the v3 v4 version, but missed the v2 and v1, Done. > >> > >> just doing a "MAKEALL arm" with your patch applied and get this error: > >> > >> Configuring for omap2420h4 board... > >> omap24xx_i2c.c:497:17: error: 'struct i2c' has no member named > >> 'irqstatus_raw' > >> omap24xx_i2c.c:528:12: error: 'struct i2c' has no member named > >> 'irqstatus_raw' > >> arm-linux-gnueabi-size: './u-boot': No such file > >> omap24xx_i2c.c: In function 'wait_for_bb': > >> omap24xx_i2c.c:497:17: error: 'struct i2c' has no member named > >> 'irqstatus_raw' > >> omap24xx_i2c.c: In function 'wait_for_event': > >> omap24xx_i2c.c:528:12: error: 'struct i2c' has no member named > >> 'irqstatus_raw' > >> make[1]: *** [omap24xx_i2c.o] Fehler 1 > >> make: *** [drivers/i2c/libi2c.o] Fehler 2 > >> make: *** Warte auf noch nicht beendete Prozesse... > >> > >> Please fix this and run a "MAKEALL arm" before repost, thanks! > > We have agreed upon this breakage with Tom - the OMAP2420 shall not > > be supported anymore in the next release. At least I understood it > > that way (and have noted it accordingly in the comments). > > Ah, ok ... so affected boards should fixed too ... > > @Tom: Could you than pick up this patch?
Yes, I just need to post the patch removing omap2420h2 support. -- Tom
signature.asc
Description: Digital signature
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
