Hello Lubomir, Am 03.06.2013 07:13, schrieb Heiko Schocher: > Hello Lubomir, > > Am 02.06.2013 13:42, schrieb Lubomir Popov: >>> Hello Lubomir, >>> >>> Am 01.06.2013 18:44, schrieb Lubomir Popov: >>>> New i2c_read, i2c_write and i2c_probe functions, tested on OMAP4 >>>> (4430/60/70), OMAP5 (5430) and AM335X (3359); should work on older >>>> OMAPs and derivatives as well. The only anticipated exception would >>>> be the OMAP2420, which shall require driver modification. > [...] >>>> drivers/i2c/omap24xx_i2c.c | 490 >>>> +++++++++++++++++++++++++++------------------ >>>> 1 file changed, 299 insertions(+), 191 deletions(-) >>> >>> Tested on 3 arm335x based boards, which one uses i2c in SPL >>> code for getting ram parameters, so: >>> >>> Tested-by: Heiko Schocher <h...@denx.de> >> Many thanks for testing, to Tom as well (he did it on the >> Beagleboards, but for one of the older versions, V3 I believe, >> right?). >> When it comes to versions, I see that V1 and V2 are still listed >> in patchwork, probably because of slightly different wording of >> the subject: >> http://patchwork.ozlabs.org/patch/233823/ >> http://patchwork.ozlabs.org/patch/246204/ >> Could you or Tom clean this up, please? Thanks. > > Cleared the v3 v4 version, but missed the v2 and v1, Done.
just doing a "MAKEALL arm" with your patch applied and get this error: Configuring for omap2420h4 board... omap24xx_i2c.c:497:17: error: 'struct i2c' has no member named 'irqstatus_raw' omap24xx_i2c.c:528:12: error: 'struct i2c' has no member named 'irqstatus_raw' arm-linux-gnueabi-size: './u-boot': No such file omap24xx_i2c.c: In function 'wait_for_bb': omap24xx_i2c.c:497:17: error: 'struct i2c' has no member named 'irqstatus_raw' omap24xx_i2c.c: In function 'wait_for_event': omap24xx_i2c.c:528:12: error: 'struct i2c' has no member named 'irqstatus_raw' make[1]: *** [omap24xx_i2c.o] Fehler 1 make: *** [drivers/i2c/libi2c.o] Fehler 2 make: *** Warte auf noch nicht beendete Prozesse... Please fix this and run a "MAKEALL arm" before repost, thanks! bye, Heiko -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
