Dear Tom Rix, In message <1238602273-27252-1-git-send-email-tom....@windriver.com> you wrote: > Zoom2 is a new board from Texas Instruments and LogicPD > This is the product description > http://www.logicpd.com/products/development-kits/texas-instruments-zoom%E2%84%A2-omap34x-ii-mdp > > This patch provides a zoom2 base target by copying zoom1 and by making some > obvious changes. This target compiles but does not yet run. > > To configure, run > make omap3_zoom2_config ... > diff --git a/board/omap3/zoom2/zoom2.c b/board/omap3/zoom2/zoom2.c > new file mode 100644 > index 0000000..f861691 > --- /dev/null > +++ b/board/omap3/zoom2/zoom2.c ... > +/****************************************************************************** > + * Routine: board_init > + * Description: Early hardware init. > + > *****************************************************************************/
Here and everywhere else: incorrect multiline comment style. Please fix everywhere. > diff --git a/include/configs/omap3_zoom2.h b/include/configs/omap3_zoom2.h > new file mode 100644 > index 0000000..9ea8ea0 ... > +/* Clock Defines */ > +#define V_OSCK 26000000 /* Clock output from T2 > */ Here and in some other places: line too long. Please fix everywhere. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de Your own mileage may vary. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
