Hi, Benoit, > > > diff --git a/doc/README.vf610 b/doc/README.vf610 new file mode > > > 100644 index 0000000..38cf5cf > > > --- /dev/null > > > +++ b/doc/README.vf610 > > > @@ -0,0 +1,10 @@ > > > +U-Boot for Freescale Vybrid VF610 > > > + > > > +This file contains information for the port of U-Boot to the > > > +Freescale > > > Vybrid > > > +VF610 SoC. > > > + > > > +1. CONVENTIONS FOR FUSE ASSIGNMENTS > > > +----------------------------------- > > > + > > > +1.1 MAC Address: It is stored in fuse bank 4, with the 16 msbs in > > > +word 2 > > > and > > > the > > > + 32 lsbs in word 3. > > > > The hunk below is still missing: > > > > doc/README.mxc_ocotp: > > --- > > on MXC > > > > This IP can be found on the following SoCs: > > + - Vybrid VF610, > > - i.MX6. > > > > Note that this IP is different from albeit similar to the IPs of the > > same name > > --- > > I have just noticed that this was actually in 6/7. Why are you putting > this into a separate patch? [Alison Wang] Because patch 2/7 is about VF610 CPU support, and doc/README.vf610 is also a document about VF610 SoC. Doc/README.mxc_ocotp is the document about a driver (IP OCOTP), so this driver document should be separated from CPU patch 2/7.
Best Regards, Alison Wang _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
