Hi Alison, On Tuesday, May 28, 2013 9:16:20 PM, Benoît Thébaudeau wrote: > Hi Alison, > > On Tuesday, May 28, 2013 10:55:42 AM, Alison Wang wrote: > > This patch adds generic codes to support Freescale's Vybrid VF610 CPU. > > > > It aligns Vybrid VF610 platform with i.MX platform. As there are > > some differences between VF610 and i.MX platforms, the specific > > codes are in the arch/arm/cpu/armv7/vf610 directory. > > > > Signed-off-by: Alison Wang <b18...@freescale.com> > > [...] > > > diff --git a/doc/README.vf610 b/doc/README.vf610 > > new file mode 100644 > > index 0000000..38cf5cf > > --- /dev/null > > +++ b/doc/README.vf610 > > @@ -0,0 +1,10 @@ > > +U-Boot for Freescale Vybrid VF610 > > + > > +This file contains information for the port of U-Boot to the Freescale > > Vybrid > > +VF610 SoC. > > + > > +1. CONVENTIONS FOR FUSE ASSIGNMENTS > > +----------------------------------- > > + > > +1.1 MAC Address: It is stored in fuse bank 4, with the 16 msbs in word 2 > > and > > the > > + 32 lsbs in word 3. > > The hunk below is still missing: > > doc/README.mxc_ocotp: > --- > on MXC > > This IP can be found on the following SoCs: > + - Vybrid VF610, > - i.MX6. > > Note that this IP is different from albeit similar to the IPs of the same > name > ---
I have just noticed that this was actually in 6/7. Why are you putting this into a separate patch? Best regards, Benoît _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
