Hi Alison, On Tuesday, May 28, 2013 10:55:47 AM, Alison Wang wrote: > VF610TWR is a board based on Vybrid VF610 SoC. > > This patch adds basic support for Vybrid VF610TWR board. > > Signed-off-by: Alison Wang <b18...@freescale.com> > Signed-off-by: Jason Jin <jason....@freescale.com> > Signed-off-by: TsiChung Liew <tsicl...@gmail.com>
[...] > diff --git a/include/configs/vf610twr.h b/include/configs/vf610twr.h > new file mode 100644 > index 0000000..77fe893 > --- /dev/null > +++ b/include/configs/vf610twr.h > @@ -0,0 +1,140 @@ > +/* > + * Copyright 2013 Freescale Semiconductor, Inc. > + * > + * Configuration settings for the Freescale Vybrid vf610twr board. > + * > + * This program is free software; you can redistribute it and/or > + * modify it under the terms of the GNU General Public License as > + * published by the Free Software Foundation; either version 2 of > + * the License, or (at your option) any later version. > + * > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + * > + * You should have received a copy of the GNU General Public License > + * along with this program; if not, write to the Free Software > + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, > + * MA 02111-1307 USA > + */ > + > +#ifndef __CONFIG_H > +#define __CONFIG_H > + > +#include <asm/arch/imx-regs.h> > +#include <config_cmd_default.h> > + > +#define CONFIG_VF610 > + > +#define CONFIG_DISPLAY_CPUINFO > +#define CONFIG_DISPLAY_BOARDINFO > + > +#define CONFIG_MACH_TYPE 4146 > + > +#define CONFIG_SKIP_LOWLEVEL_INIT > + > +/* Enable passing of ATAGs */ > +#define CONFIG_CMDLINE_TAG > + > +#define CONFIG_CMD_FUSE > +#ifdef CONFIG_CMD_FUSE > +#define CONFIG_MXC_OCOTP > +#endif > + > +/* Size of malloc() pool */ > +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2 * 1024 * > 1024) > + > +#define CONFIG_BOARD_EARLY_INIT_F > + > +#define CONFIG_FSL_LPUART > +#define LPUART_BASE UART1_BASE > + > +/* Allow to overwrite serial and ethaddr */ > +#define CONFIG_ENV_OVERWRITE > +#define CONFIG_SYS_UART_PORT (1) > +#define CONFIG_BAUDRATE 115200 > + > +#undef CONFIG_CMD_IMLS > + > +#define CONFIG_MMC > +#define CONFIG_FSL_ESDHC > +#define CONFIG_SYS_FSL_ESDHC_ADDR 0 > +#define CONFIG_SYS_FSL_ESDHC_NUM 1 > + > +#define CONFIG_SYS_FSL_ERRATUM_ESDHC111 > + > +#define CONFIG_CMD_MMC > +#define CONFIG_GENERIC_MMC > +#define CONFIG_CMD_FAT > +#define CONFIG_DOS_PARTITION > + > +#define CONFIG_CMD_PING > +#define CONFIG_CMD_DHCP > +#define CONFIG_CMD_MII > +#define CONFIG_CMD_NET > +#define CONFIG_FEC_MXC > +#define CONFIG_MII > +#define IMX_FEC_BASE ENET_BASE_ADDR > +#define CONFIG_FEC_XCV_TYPE RMII > +#define CONFIG_FEC_MXC_PHYADDR 0 Why don't you add support for the 2nd FEC? Do you plan to do it later? > +#define CONFIG_PHYLIB > +#define CONFIG_PHY_MICREL > + > +#define CONFIG_BOOTDELAY 3 > + > +#define CONFIG_SYS_TEXT_BASE 0x3f008000 > + > +/* Miscellaneous configurable options */ > +#define CONFIG_SYS_LONGHELP /* undef to save memory */ > +#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ > +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " > +#define CONFIG_SYS_PROMPT "Vybrid U-Boot > " > +#undef CONFIG_AUTO_COMPLETE > +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ > +#define CONFIG_SYS_PBSIZE \ > + (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) > +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ > +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE > + > +#define CONFIG_CMD_MEMTEST > +#define CONFIG_SYS_MEMTEST_START 0x80010000 > +#define CONFIG_SYS_MEMTEST_END 0x87C00000 Please make sure to have runtime-tested this address range with the mtest command since bad mtest addresses are the reason why CONFIG_CMD_MEMTEST has been removed from the default commands. [...] Best regards, Benoît _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
