Dear Bo Shen, Bo Shen <voice.s...@atmel.com> writes: >Add sama5d3xek support with following feature > - boot from NAND flash, PMECC support, 4bit ECC @ 512 bytes sector > - boot from SPI flash support > - boot from SD card support > - LCD support > - EMAC support > - USB OHCI support > >Signed-off-by: Bo Shen <voice.s...@atmel.com> > >--- >Changes in v3: > - Split new pmc register in a standalone patch > - The EMAC support need: net: macb: using AT91FAMILY replace #ifdeferry > - http://patchwork.ozlabs.org/patch/239064/ > >Changes in v2: > - Remove unneeded #undef > - Using string directly > - Add missed copyright > - Using pull up for usart Tx line > - Using pull up for spi cs > - make code more readable in clock.c file > - move LCD higher 8 bit to board file (This is board related) > > MAINTAINERS | 1 + > arch/arm/cpu/armv7/at91/Makefile | 52 +++++ > arch/arm/cpu/armv7/at91/clock.c | 125 ++++++++++++ > arch/arm/cpu/armv7/at91/cpu.c | 90 +++++++++ > arch/arm/cpu/armv7/at91/reset.c | 47 +++++ > arch/arm/cpu/armv7/at91/sama5d3_devices.c | 196 ++++++++++++++++++ > arch/arm/cpu/armv7/at91/timer.c | 139 +++++++++++++ > arch/arm/include/asm/arch-at91/at91_dbu.h | 4 + > arch/arm/include/asm/arch-at91/clk.h | 1 + > arch/arm/include/asm/arch-at91/hardware.h | 2 + > arch/arm/include/asm/arch-at91/sama5d3.h | 212 ++++++++++++++++++++ > arch/arm/include/asm/arch-at91/sama5d3_smc.h | 79 ++++++++ > board/atmel/sama5d3xek/Makefile | 51 +++++ > board/atmel/sama5d3xek/sama5d3xek.c | 275 ++++++++++++++++++++++++++ > boards.cfg | 3 + > include/configs/sama5d3xek.h | 245 +++++++++++++++++++++++ > 16 files changed, 1522 insertions(+) > create mode 100644 arch/arm/cpu/armv7/at91/Makefile > create mode 100644 arch/arm/cpu/armv7/at91/clock.c > create mode 100644 arch/arm/cpu/armv7/at91/cpu.c > create mode 100644 arch/arm/cpu/armv7/at91/reset.c > create mode 100644 arch/arm/cpu/armv7/at91/sama5d3_devices.c > create mode 100644 arch/arm/cpu/armv7/at91/timer.c > create mode 100644 arch/arm/include/asm/arch-at91/sama5d3.h > create mode 100644 arch/arm/include/asm/arch-at91/sama5d3_smc.h > create mode 100644 board/atmel/sama5d3xek/Makefile > create mode 100644 board/atmel/sama5d3xek/sama5d3xek.c > create mode 100644 include/configs/sama5d3xek.h
applied to u-boot-atmel/master, thanks! Best regards, Andreas Bießmann _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
