On Tue, Mar 31, 2009 at 12:30 PM, Detlev Zundel <d...@denx.de> wrote:
> Hi Michael,
[...]
> The patch in your mail does still not apply. Neither git-am (after
> fixing the patch with a valid e-mail) nor patch can do anything with it.
>
> Thanks
> Detlev
>
Sorry for the previous mail,
I have to enable the git operation via gmail on my workstation.
Meanwhile I created the patch again by diff.
Thanks,
Michael
The patch fixes the bug of partial initialization of global network
parameters.
Upon u-boot's start up the first ping command causes a failure of the
consequent TFTP transfers. It happens in the recently added mechanism of
NetLoop initialization where initialization of global network parameters is
separated in the NetInitLoop routine which is called per env_id change.
Thus, ping request will initialize the network parameters necessary
for ping operation only, afterwards the env_changed_id will be set
to the env_id that will prevent all following initialization requests
from other protocols.
The problem is that the initialized by ping subset of network parameters
is not sufficient for other protocols and particularly for TFTP
which requires the NetServerIp also.
Signed-off-by: Michael Zaidman <michael.zaidman at gmail.com>
mich...@michaelz:~/develop$ diff -u u-boot-git/net/net.c
u-boot-git-test1/net/net.c
--- u-boot-git/net/net.c 2009-03-31 13:56:18.000000000 +0300
+++ u-boot-git-test1/net/net.c 2009-03-30 15:57:14.000000000 +0300
@@ -288,64 +288,13 @@
if (env_changed_id == env_id)
return 0;
- switch (protocol) {
-#if defined(CONFIG_CMD_NFS)
- case NFS:
-#endif
-#if defined(CONFIG_CMD_PING)
- case PING:
-#endif
-#if defined(CONFIG_CMD_SNTP)
- case SNTP:
-#endif
- case NETCONS:
- case TFTP:
- NetCopyIP(&NetOurIP, &bd->bi_ip_addr);
- NetOurGatewayIP = getenv_IPaddr ("gatewayip");
- NetOurSubnetMask= getenv_IPaddr ("netmask");
- NetOurVLAN = getenv_VLAN("vlan");
- NetOurNativeVLAN = getenv_VLAN("nvlan");
+ NetCopyIP(&NetOurIP, &bd->bi_ip_addr);
+ NetOurGatewayIP = getenv_IPaddr ("gatewayip");
+ NetOurSubnetMask= getenv_IPaddr ("netmask");
+ NetServerIP = getenv_IPaddr ("serverip");
+ NetOurNativeVLAN = getenv_VLAN("nvlan");
+ NetOurVLAN = getenv_VLAN("vlan");
- switch (protocol) {
-#if defined(CONFIG_CMD_NFS)
- case NFS:
-#endif
- case NETCONS:
- case TFTP:
- NetServerIP = getenv_IPaddr ("serverip");
- break;
-#if defined(CONFIG_CMD_PING)
- case PING:
- /* nothing */
- break;
-#endif
-#if defined(CONFIG_CMD_SNTP)
- case SNTP:
- /* nothing */
- break;
-#endif
- default:
- break;
- }
-
- break;
- case BOOTP:
- case RARP:
- /*
- * initialize our IP addr to 0 in order to accept ANY
- * IP addr assigned to us by the BOOTP / RARP server
- */
- NetOurIP = 0;
- NetServerIP = getenv_IPaddr ("serverip");
- NetOurVLAN = getenv_VLAN("vlan"); /* VLANs must be read */
- NetOurNativeVLAN = getenv_VLAN("nvlan");
- case CDP:
- NetOurVLAN = getenv_VLAN("vlan"); /* VLANs must be read */
- NetOurNativeVLAN = getenv_VLAN("nvlan");
- break;
- default:
- break;
- }
env_changed_id = env_id;
return 0;
}
@@ -440,10 +389,7 @@
#if defined(CONFIG_CMD_DHCP)
case DHCP:
- /* Start with a clean slate... */
BootpTry = 0;
- NetOurIP = 0;
- NetServerIP = getenv_IPaddr ("serverip");
DhcpRequest(); /* Basically same as BOOTP */
break;
#endif
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
