On 05/03/2013 09:02 AM, Stephen Warren wrote: > On 04/29/2013 03:21 AM, Jim Lin wrote: >> Tegra114 USB EHCI is compatible with Tegra30 USB EHCI >> except: >> 1. Port Reset - Tegra30 takes 55ms, Tegra114 takes 50 ms to finish. >> 2. PLL parameters. >> >> Jim Lin (3): >> ARM: Tegra: FDT: Add USB support for T20/T30/T114 >> ARM: Tegra: USB: Add driver support for Tegra30/Tegra114 >> Tegra: Config: Enable Tegra30/Tegra114 USB function > > The series, > > Tested-by: Stephen Warren <swar...@nvidia.com> > > On both Cardhu (Tegra30) and Dalmore (Tegra114). :-) :-) Now, I can > netboot with upstream U-Boot on all my boards.
I just noticed one problem with this patch series. If I run the following commands with Cardhu in its dock, and a USB Ethernet dongle attached to the dock: usb start 0 dhcp ${scriptaddr} boot.scr.uimg ... then everything works as expected; the file is downloaded. However, if I run those same commands with Cardhu either undocked, or docked but with no USB Ethernet dongle plugged into the dock, then the dhcp command hangs the system hard; CTRL-C won't interrupt it for example. Can you please fix this? _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot